Product Description
Grease fitting
Frequently Asked Questions
Q: What thread size and type does the 2304289 grease fitting have?
A: The 2304289 is a standard grease fitting (also called a zerk fitting) for fork lift components. Thread size is typically 1/4 inch NPT or metric equivalent. Verify the threaded port size on your equipment before ordering to ensure proper fitment.
Q: Where on a fork lift does the 2304289 grease fitting get installed?
A: Grease fittings are commonly found on load wheels, steering components, and pivot joints. The 2304289 is typically used on wheel axles and steering mechanisms. Consult your fork lift maintenance schedule to locate all grease points.
Q: What is the material and pressure rating of this grease fitting?
A: The 2304289 is typically made of steel or stainless steel for corrosion resistance. It is rated for standard grease gun pressure (3,000-5,000 PSI working range). Do not over-pressure the fitting as it can cause seal failure or fitting ejection.
Q: How often should grease be applied through the 2304289 fitting?
A: Greasing frequency depends on duty cycle and environment. Check your fork lift manual for recommended intervals, typically every 40-80 operating hours for wheel axles and steering components. Use only the specified grease grade to avoid incompatibility issues.
Q: What happens if a grease fitting becomes blocked or damaged?
A: A blocked fitting prevents lubrication, causing premature wear and bearing failure on that component. A damaged fitting may leak grease or allow debris entry. Replace damaged fittings immediately to maintain proper lubrication.