Product Description
BEARING assembly (SINGLE SHIELD)
Frequently Asked Questions
Q: What is the difference between SKU 26400180 and other bearing assemblies for pallet jacks?
A: SKU 26400180 is a bearing assembly with single shield construction, providing one-sided protection against contaminants while maintaining lower drag compared to double-sealed designs. This configuration is standard in manual pallet jack wheels where some protection is required without significantly restricting bearing rotation.
Q: What brands of manual pallet jacks use SKU 26400180?
A: SKU 26400180 fits manual pallet jacks from Crown, Toyota, Raymond, Yale, Hyster, Jungheinrich, and other standard manufacturers. Confirm the bearing bore diameter and OEM part number specification with your equipment before ordering. Check your pallet jack nameplate or parts list for exact compatibility.
Q: Can SKU 26400180 be used in cold storage or freezer environments?
A: SKU 26400180 single-shield design offers limited protection in cold storage. At temperatures below 32 degrees Fahrenheit, grease may become stiff or sluggish, increasing bearing friction. For freezer or cold storage applications below 20 degrees Fahrenheit, contact us to confirm whether cold-rated bearing assemblies or contact-sealed designs are available.
Q: What maintenance is required for SKU 26400180?
A: Inspect SKU 26400180 wheels quarterly for smooth rotation, unusual noise, or grinding sounds. Keep wheel and axle areas clean to prevent debris from entering the shield opening. Wipe down wheels after operation in wet environments. If wheel resistance increases or noise develops, replace the bearing assembly. Typical service life is 18-24 months under normal warehouse duty.
Q: Are there cross-reference or equivalent part numbers for SKU 26400180?
A: Cross-reference information for SKU 26400180 is limited. Use the SKU 26400180 designation when ordering. If you need to verify compatibility with a specific manual pallet jack model, provide us with your equipment serial number, brand, and model, and we can confirm if this bearing is a direct fit.
