Product Description
BEARING assembly
Frequently Asked Questions
Q: What is the bore diameter and load rating of the 26925 bearing assembly?
A: The 26925 is a bearing assembly for manual pallet jack wheel swivels or load wheels. Verify the bore diameter, outer race diameter, width, and static load rating from the specification sheet. Confirm these dimensions match your jacks wheel axle before ordering to ensure proper fitment and safe load support.
Q: Which manual pallet jack brands use the 26925 bearing assembly?
A: The 26925 is compatible with manual pallet jacks from Crown, Toyota, Raymond, Yale, Hyster, BT, and other standard equipment manufacturers. Cross-reference your jack model number and axle diameter against the OEM parts diagram. Many manual jacks use interchangeable bearing sizes, but fitment requires confirming bore and width dimensions.
Q: What bearing material and seal type does the 26925 have?
A: The 26925 is typically a sealed ball or roller bearing with metal or rubber seals to keep contaminants and moisture out. The bearing cage is usually steel or brass. Sealed design extends life in wet and dirty warehouse environments. Confirm whether the assembly uses ball or roller elements, as this affects load capacity and replacement fit.
Q: How long does the 26925 bearing assembly last and when should it be replaced?
A: Bearing life depends on load and operating hours. A manual pallet jack bearing assembly typically lasts 3 to 5 years with normal duty. Replace immediately if you notice grinding noise, rough rotation, side play in the wheel, or visible damage to the bearing races. A seized or damaged bearing reduces steering control and jack safety.
Q: Is the 26925 a complete bearing assembly or just the bearing cartridge?
A: Confirm whether the 26925 is a complete wheel hub assembly, a bearing cartridge, or a sealed bearing race only. Part numbers can describe different configurations of the same component. Check the product specification and compatibility notes to understand exactly what you are receiving and whether it fits your jack wheel directly.
Q: Does the 26925 bearing assembly require lubrication after installation?
A: Sealed bearing assemblies like the 26925 are pre-lubricated and do not require additional greasing under normal operation. Do not force grease into a sealed bearing, as this damages the seals and reduces service life. Replace the bearing when it fails rather than attempt to re-lubricate.
