Bearing Assembly for Manual Pallet Jack

Frequently Asked Questions

Q: What is SKU 309.25015.00 bearing assy used for?
A: The 309.25015.00 is a bearing assembly for manual pallet jacks. It supports the drive wheel or load wheel axle and must handle high radial and thrust loads during lifting and lowering cycles. This bearing assembly is critical for smooth jack operation and safe load handling.

Q: Which manual pallet jack models fit the 309.25015.00?
A: The 309.25015.00 bearing assy is compatible with standard manual pallet jacks from Crown, Toyota, Raymond, Yale, and other major OEM manufacturers. Bearing bore diameter, shaft size, and mounting flange must match your equipment specifications exactly. Verify dimensions before ordering to ensure proper fitment.

Q: What material and load rating does the 309.25015.00 have?
A: The 309.25015.00 uses sealed ball bearings or roller bearings rated for manual pallet jack duty cycles. Load capacity depends on bearing type and size. Standard ratings support 2500 to 5500 pound load wheels depending on jack capacity. Check your equipment spec plate to confirm your bearing requirement.

Q: How long does the 309.25015.00 bearing assembly typically last?
A: With normal warehouse use and basic maintenance, this bearing assembly lasts 2-4 years. Lifespan varies based on daily cycle count, load weight, floor surface, and lubrication frequency. Wet or corrosive environments shorten life significantly. Worn bearings show grinding noise and jack wheels may lock or wobble.

Q: What maintenance does the 309.25015.00 require?
A: Sealed bearing assemblies require minimal maintenance. Periodically check for smooth wheel rotation and listen for grinding or grinding sounds. If noise develops or wheel movement becomes rough or stiff, the bearing is worn and must be replaced. Do not attempt to disassemble or repack sealed bearings.

Q: Can the 309.25015.00 be repaired or must it be replaced?
A: The 309.25015.00 is a sealed bearing assembly and cannot be serviced or repaired. Once bearings wear out or seals fail, the entire assembly must be replaced. Attempting to disassemble or re-lubricate sealed bearings will damage them and void any warranty.