Product Description
BEARING assembly
Frequently Asked Questions
Q: What manual pallet jack models use bearing assembly 3099549?
A: SKU 3099549 is a bearing assembly for manual pallet jacks from Crown, Toyota, Raymond, Yale, and Hyster. It fits specific pallet jack models designed for standard indoor warehouse use. Confirm your exact pallet jack model and serial number before ordering to ensure proper fitment.
Q: How does bearing assembly 3099549 differ from 309618?
A: Both SKU 3099549 and 309618 are manual pallet jack bearing assemblies, but they are designed for different pallet jack models or component positions. Bore diameter, outer diameter, width, and load rating may differ. Verify your equipment model to order the correct SKU. Contact us to confirm which bearing is correct for your pallet jack.
Q: What load capacity does bearing assembly 3099549 support?
A: Bearing load capacity depends on bearing size, material, and lubrication condition. Standard manual pallet jack bearings typically support 2000 to 5000 pounds per wheel. Contact us with the SKU 3099549 and your pallet jack model to confirm the rated load capacity. Exceeding rated capacity causes rapid bearing wear and failure.
Q: How often should bearing assembly 3099549 be lubricated?
A: Under normal warehouse use, bearing assembly 3099549 should be re-lubricated every 3 to 6 months. In cold storage (below 32 degrees Fahrenheit), increase lubrication frequency to every 1 to 3 months because grease thickens in cold. In wet or outdoor environments, lubricate every 1 to 3 months. Clean debris before applying fresh lubricant.
Q: What are the warning signs that bearing 3099549 needs replacement?
A: Replace the bearing if you observe grinding or squealing noise from the wheel, visible wobbling or side-to-side play in the wheel, resistance or drag when rolling, discoloration or corrosion on the bearing, or if the bearing does not respond to re-lubrication after 2 to 3 applications.
