Product Description
BEARING assembly
Frequently Asked Questions
Q: What size and load rating does the 360935 bearing assembly have?
A: The 360935 is a sealed bearing assembly with a 0.875 inch bore, 2.25 inch outside diameter, and rated for 3,500 pound static loads. Confirm bore and outer diameter dimensions match your equipment before purchase.
Q: Is the 360935 compatible with the 360826, or are they different sizes?
A: The 360935 and 360826 are different sizes. The 360935 has a slightly smaller bore (0.875 inch versus 1 inch) and lower load rating. They are not interchangeable. Verify your shaft diameter and load requirements before ordering.
Q: Which pallet jack models use the 360935 bearing assembly?
A: This bearing assembly fits load wheels and pump wheels on manual pallet jacks from Yale, Crown, Raymond, and Toyota. Cross-reference your specific model and the wheel position to ensure correct fitment.
Q: What is the seal type and material composition?
A: The 360935 uses a nitrile rubber seal with deep groove ball bearings in a steel outer race. The seal is designed to exclude dust and moisture in warehouse environments. Not rated for continuous outdoor or washdown use.
Q: How do I know when a bearing assembly needs replacement?
A: Listen for grinding or rumbling sounds during operation. Check for lateral play by attempting to wiggle the wheel side to side. If the bearing races feel rough when hand-spun or the wheel wobbles excessively, replacement is needed.
Q: What environmental factors affect this bearing assembly in cold storage?
A: The 360935 operates reliably in cold storage down to minus 20 degrees Fahrenheit. Nitrile seals remain flexible at these temperatures. Performance may degrade slightly due to grease viscosity changes, but the bearing remains functional.