Product Description
Bearing ass'y
Frequently Asked Questions
Q: Is the 41-23338 bearing assembly compatible with all Hyster forklift models?
A: The 41-23338 bearing assembly is compatible with specific Hyster forklift generations. Verify your equipment serial number, model code, and mast type before ordering. Not all Hyster models use identical bearing assemblies. Cross-reference your parts diagram or contact our parts team with your serial number for confirmation.
Q: What is the difference between SKU 41-23335 and SKU 41-23338?
A: Both bearing assemblies serve forklift mast applications, but they differ in bore diameter, load rating, or cage design. The 41-23338 may be optimized for different mast heights or load capacities. Use only the exact SKU specified for your equipment model. Substitution can cause misalignment and premature failure.
Q: How do operating temperature changes affect the 41-23338 bearing assembly?
A: Extreme temperature swings cause bearing grease to thin or thicken, reducing lubrication effectiveness. In cold storage below 0 degrees Fahrenheit, use synthetic bearing grease formulated for low temperatures. In hot environments above 100 degrees Fahrenheit, monitor grease viscosity and replace more frequently to prevent overheating.
Q: What maintenance schedule should I follow for the 41-23338?
A: Inspect the bearing assembly every 3 months or every 300 operating hours, whichever comes first. Relubricate every 6 months under normal use, more frequently in heavy-duty applications. Check for bearing play, noise, and rust during each inspection. Replace the bearing if grease cannot be added due to seal failure or internal damage.
Q: Does the 41-23338 bearing assembly come pre-greased?
A: Most OEM bearing assemblies come pre-greased and ready for installation. Do not over-grease the bearing upon installation, as excess grease increases friction and heat. Use only the grease type specified in your equipment manual. Mixing incompatible grease types can cause bearing damage.