Product Description
Condenser
Frequently Asked Questions
Q: What is the cooling capacity and tube design of the 5915629081 condenser?
A: The 5915629081 is a hydraulic oil condenser with 12.5 square feet of aluminum fin surface and copper-brass tubes. It handles flow rates up to 25 gallons per minute and maintains oil temperatures below 140 degrees Fahrenheit in typical warehouse environments.
Q: Which forklift models use the 5915629081 condenser?
A: This condenser fits Hyster, Linde, Jungheinrich, and Clark electric forklifts with integrated hydraulic cooling systems. Confirm your equipment model year and hydraulic flow rate (20 to 30 GPM) match the condenser specifications before purchasing.
Q: What maintenance is required for this condenser?
A: Monthly visual inspection for oil leaks, blockages, or fin damage is recommended. Clean aluminum fins with compressed air to remove dust buildup. Check oil condition every 500 hours to prevent sludge accumulation in tubes, which reduces cooling efficiency.
Q: What causes condenser failures and reduced performance?
A: Dirty oil or contamination accelerates tube fouling and reduces heat transfer. Mechanical damage to fins, tube corrosion from water in hydraulic fluid, and loose mounting brackets also degrade performance. High ambient temperatures above 90 degrees Fahrenheit can overwhelm cooling capacity on heavily loaded equipment.
Q: What is the pressure rating and connection size for this condenser?
A: The 5915629081 is rated for 350 PSI maximum pressure with 0.625 inch NPT inlet and outlet ports. Verify port size and orientation match your hydraulic line configuration to avoid leaks and ensure proper flow direction.