Product Description
6205 bearing assembly designed for manual pallet jack load wheel applications. Deep groove single row radial ball bearing constructed of SAE 52100 chrome steel, 25 mm bore, 52 mm OD, 15 mm width, suitable for Baker, Crown, and JET models. Available as shielded, open, or sealed format. Rated dynamic load 14,000 N, static load 8,040 N. Includes mandatory cross-referenced and OEM part numbers for industry compatibility.
Specifications
Material & Construction
| Material Specification | SAE 52100 chrome steel (rings and balls) |
| Cage Material | Pressed steel |
Part Numbers
| Manufacturer Part Number | 6205-Z |
| OEM Part Number | JT9-BB-6205Z |
| Cross-Reference Part Numbers | Replaces BA6205ZZ, supersedes 813080-001, equivalent to NTN 6205, SKF 6205, Jet JT9-BB-6205Z |
| Compatible Models | Baker pallet jack, Crown Electric Walkie Pallet Truck SX 3000, Powermatic/JET band saw and miter saw (model references) |
Frequently Asked Questions
Q: What are the key specifications of the 6205 bearing assembly?
A: The 6205 is a deep groove single row radial ball bearing with a 25 mm bore, 52 mm outside diameter, and 15 mm width. It is constructed from SAE 52100 chrome steel and is rated for 14,000 N dynamic load and 8,040 N static load. It is available in shielded, open, or sealed format.
Q: Which manual pallet jack models and manufacturers is the 6205 compatible with?
A: The 6205 bearing assembly is designed for manual pallet jack load wheel applications and is compatible with Baker, Crown, and JET model pallet jacks. The bearing meets industry standards for cross-compatibility with other major equipment manufacturers in the material handling sector.
Q: What material is used in the 6205 bearing and how does it contribute to durability?
A: The 6205 is constructed from SAE 52100 chrome steel, which provides high hardness and resistance to deformation under load. Chrome steel raceways resist spalling and maintain precision over extended use periods, making this bearing suitable for demanding load wheel applications where repeated heavy loads are common.
Q: What are the OEM and cross-reference part numbers for the 6205 bearing?
A: The OEM part number is JT9-BB-6205Z and the manufacturer part number is 6205-Z. Cross-reference equivalents include BA6205ZZ, and it supersedes 813080-001. Brand equivalents are NTN 6205, SKF 6205, and JET JT9-BB-6205Z. Verify the shield type (shielded, open, or sealed) matches your equipment requirements before ordering.
Q: What is the difference between the shielded, open, and sealed formats of the 6205?
A: Shielded versions have one or both sides partially enclosed to reduce contamination while allowing some grease migration. Open versions have no shields and are used where full grease exchange is needed. Sealed versions have rubber or metal seals that retain grease longer and provide maximum contamination protection. Select based on your equipment design and operating environment.
Q: What maintenance or monitoring is recommended for the 6205 bearing during service?
A: Monitor the bearing periodically for unusual noise, increased friction, or excessive heat. These symptoms indicate wear or contamination. The bearing should rotate smoothly under normal load. If sealed versions are used, check that seals remain intact. Replace the bearing when performance degrades or noise becomes audible.