Product Description
7212 angular contact ball bearing: 60 mm bore, 110 mm OD, 22 mm width, 40° contact angle, available as single shield/open, cross-references SKF 7212 BECBM, NTN 7212, Schaeffler 7212-B-XL-JP. Typical for manual pallet jack bearing assemblies requiring high dynamic and static loading.
Specifications
Part Numbers
| Cross-Reference Part Numbers | SKF 7212, SKF 7212 BECBM, SKF 7212 BECBP, NTN 7212, Schaeffler 7212-B-XL-JP |
| OEM Part Number | 7212 |
| Manufacturer Part Number | 7212 BECBM (SKF), 7212 BECBP (SKF), 7212-B-XL-JP (Schaeffler), 7212 (NTN) |
| Replaces/Supersedes Part Numbers | Supersedes and interchangeable with all above 7212-series designations from SKF, NTN, and Schaeffler |
Frequently Asked Questions
Q: What are the specifications for the 7212 angular contact ball bearing?
A: The 7212 is an angular contact ball bearing with a 60 mm bore, 110 mm outside diameter, 22 mm width, and 40 degree contact angle. It is available as single shield or open configuration. This bearing is designed for high dynamic and static loading typical in pallet jack and lift equipment applications. The angular contact design enables the bearing to support combined radial and axial loads.
Q: What are the cross-reference part numbers for the 7212 bearing?
A: The 7212 has multiple cross-references: SKF 7212, SKF 7212 BECBM, SKF 7212 BECBP, NTN 7212, and Schaeffler 7212-B-XL-JP. These designations are interchangeable and supersede equivalent older part numbers. When sourcing replacement bearings, confirm that bore (60 mm), outside diameter (110 mm), width (22 mm), and contact angle (40 degrees) match your equipment specifications exactly.
Q: Which manual pallet jack models use the 7212 bearing?
A: The 7212 is typical for manual pallet jack bearing assemblies. The 60 mm bore and 110 mm outside diameter make it compatible with equipment from Crown, Toyota, Raymond, Yale, Hyster, and similar manufacturers. Verify your equipment documentation for bearing specifications before ordering. The angular contact design supports the combined radial and axial loads encountered during pallet manipulation and positioning.
Q: What load capacity does the 7212 bearing support?
A: The 7212 is engineered for high dynamic and static loading. Angular contact ball bearings with a 40 degree contact angle support combined radial and axial forces more effectively than deep groove bearings. Exact load ratings depend on lubrication condition, operating speed, and application. Consult bearing manufacturer technical data sheets or your equipment specifications for precise dynamic and static load ratings applicable to your pallet jack model.
Q: What is the difference between single shield and open configuration for the 7212?
A: Single shield configuration has one metal or plastic shield on one side of the bearing to exclude contaminants. Open configuration has no shields on either side, allowing easier bearing access for lubrication or inspection. Single shield is preferred in clean indoor warehouse environments. Open configuration may be specified if equipment design requires complete bearing accessibility. Both configurations support identical load ratings and dimensions.