Product Description
Polyurethane steer wheel for manual pallet jacks. 7 inch diameter, 2 inch width, 20 mm bearing bore. Made with a steel core and molded polyurethane tread, 95A durometer, suitable as a replacement steer wheel for standard manual pallet trucks.
Specifications
Material & Construction
| Tread Material | Polyurethane, molded |
| Hub Material | Steel core |
| Tread Hardness | 95A durometer (Polyurethane) |
Part Numbers
| Manufacturer Part Number | CE-STEER-0722820 |
Frequently Asked Questions
Q: What equipment models is the 72280 steer wheel compatible with?
A: The 72280 is a 7 inch diameter, 2 inch width steer wheel with a 20 mm bearing bore, designed as a replacement for manual pallet jacks across multiple brands including Crown, Toyota, Raymond, Yale, and Hyster. Verify your jack model and wheel bore diameter match 20 mm before ordering, as some manual pallet jack models use different bore sizes.
Q: What is the material composition and durability of the 72280 wheel?
A: The 72280 features a steel core hub with molded polyurethane tread rated at 95A durometer hardness. This polyurethane compound provides good grip on standard warehouse floors and resists wear from frequent steering. Polyurethane wheels of this durometer typically last 3 to 5 years under normal manual pallet jack use, depending on floor conditions and load frequency.
Q: How do I know if the 72280 steer wheel needs replacement?
A: Replace the 72280 when you notice flat spots on the tread, visible chunks missing from the polyurethane surface, hardening or cracking of the rubber, or steering that becomes stiff or jerky. A worn wheel loses grip and makes steering difficult on wet or uneven floors. Inspect wheels monthly on high-use equipment.
Q: What maintenance does the 72280 steer wheel require?
A: Keep the 72280 wheel clean by wiping debris and spilled oils from the tread. Do not expose the wheel to prolonged heat above 50 degrees Celsius, as polyurethane can soften. Lubricate the 20 mm bearing bore with a light machine oil annually or as needed; do not over-grease, as excess lubrication attracts dirt.
Q: Are there cross-reference part numbers for the 72280?
A: The 72280 corresponds to OEM part number CE-STEER-0722820. Check your equipment documentation for the OEM part number to confirm compatibility. If your manual pallet jack uses a different bore size, wheel diameter, or width, you will need a different part number.