760342

Frequently Asked Questions

Q: What are the specifications for the 760342 bearing assembly?
A: The 760342 is a single shield bearing assembly used on manual pallet jacks. It features a sealed design on one side to protect against contamination while allowing grease retention. Exact bore diameter, outer diameter, and width specifications depend on your jack model. Verify dimensions match your equipment before ordering.

Q: Which manual pallet jack models use the 760342 bearing assembly?
A: The 760342 fits manual pallet jacks from Crown, Toyota, Raymond, Yale, and other major material handling manufacturers. Cross-reference your pallet jack model number and serial range with equipment documentation to confirm correct fitment.

Q: What does single shield design mean on the 760342 bearing?
A: Single shield means the bearing has a protective metal cover on one side only, not both sides. This allows easier access for greasing on the open side while the shield protects against dirt and debris ingress from the other side. The open side requires periodic lubrication.

Q: How often should I grease the 760342 bearing assembly?
A: Grease the 760342 bearing quarterly or every 500 operating hours, whichever comes first. Apply multi-purpose lithium grease through the open shield side. Over-greasing can cause heat buildup and premature failure, so use only the recommended amount per application.

Q: What is the typical lifespan of the 760342 bearing assembly?
A: The 760342 bearing typically lasts 3 to 5 years with proper maintenance and regular greasing. Lifespan depends on load rating, operating hours, and maintenance frequency. Signs of wear include grinding noise, increased drag, or visible corrosion around the shield.

Q: Is the 760342 different from bearing assembly SKU 7603420?
A: The 760342 and 7603420 are similar bearing assemblies with single shield design. Verify the exact part number required for your equipment, as subtle differences in bore diameter or seal configuration may exist between these SKUs.