Product Description
The MU 90165 steer wheel assembly is an OEM replacement component for Multiton manual pallet jacks, featuring an 8 inch diameter polyurethane tread with nylon hub, 2 inch nominal width, and precision ball bearings for low-resistance, high-cycle manual material handling applications. Compatible with TM, M, J, and S Series Multiton pallet trucks.
Compatibility: Fits pallet jacks made by Multiton, model MU 90165. SKU: MU 90165
Specifications
Material & Construction
| Tread Material | Polyurethane |
| Hub Material | Nylon polymer composite |
| Finish/Coating | Natural nylon hub, polyurethane tread extruded and bonded |
Part Numbers & Compatibility
| OEM Part Number | MU 90165 |
| Manufacturer Part Number | MU 90165 |
Frequently Asked Questions
Q: What are the MU 90165 wheel dimensions?
A: The MU 90165 is 8 inches in diameter with a 2 inch nominal width. This is the standard steering wheel size for most Multiton TM, M, J, and S series manual pallet jacks. Measure your current wheel before ordering to confirm compatibility.
Q: What is the hub and tread material composition of the MU 90165?
A: The MU 90165 features a nylon polymer composite hub with polyurethane tread that is extruded and bonded to the hub. The natural nylon hub finish resists corrosion and minimizes floor marking. This bonded construction eliminates hub-to-tread separation issues common in older, pressed assemblies.
Q: Which Multiton pallet jack models fit the MU 90165?
A: The MU 90165 is compatible with Multiton TM, M, J, and S series manual pallet trucks. Verify your equipment series and bearing bore (typically 20mm or 25mm) before ordering. Contact us with your equipment details if you are unsure of the correct replacement assembly.
Q: What bearing type does the MU 90165 include?
A: The MU 90165 incorporates precision ball bearings designed for low-resistance, high-cycle material handling. The sealed bearing design reduces bearing play and extends service intervals compared to non-sealed bearing assemblies used in older Multiton jacks.
Q: How does the polyurethane tread on the MU 90165 perform on wet floors?
A: Standard polyurethane tread on the MU 90165 provides adequate grip on dry and damp concrete but may lose traction on wet floors or in cold storage below 40 degrees Fahrenheit. For wet-floor or freezer applications, consider the MU 90165-P-A or consult with us about high-traction tread alternatives.
Q: What is the expected service life of the MU 90165?
A: In moderate warehouse duty, the MU 90165 typically delivers 24 to 36 months of service before tread wear or bearing degradation requires replacement. High-speed pushing and floor surface type affect lifespan. Inspect the assembly at 18-month intervals; replace if bearing noise, play, or tread separation occurs.