Product Description
BEARING assembly (SINGLE SHIELD)
Frequently Asked Questions
Q: What does the single shield design on SKU 985272 mean?
A: SKU 985272 has a single metal or rubber shield on one side of the bearing, leaving the opposite side open. This design allows access to the bearing for lubrication while providing some contamination protection. Single shield bearings are common in material handling wheel and mast applications.
Q: What manual pallet jack models use SKU 985272 bearing assembly?
A: SKU 985272 is compatible with multiple manual pallet jack models from Crown, Toyota, Raymond, Yale, and similar manufacturers using standard bearing assemblies. Confirm your equipment model, bearing bore diameter, and mounting configuration before ordering.
Q: Can SKU 985272 replace double-shielded bearing assemblies?
A: No. SKU 985272 single shield design is not interchangeable with double-shielded bearings. Use only if your equipment requires single shield configuration. Using incorrect shield design may result in bearing contamination and premature failure.
Q: How do I lubricate SKU 985272 bearing assembly?
A: The open side of the single shield bearing allows access for greasing. Consult your equipment manual for lubrication interval and grease type. Do not over-grease, as excess lubricant attracts dirt and degrades bearing performance.
Q: What is the typical replacement interval for SKU 985272?
A: SKU 985272 service life depends on load cycles, maintenance, and floor conditions. With regular lubrication and inspection, the bearing typically operates 2 to 4 years in warehouse environments. Replace when you observe roughness, increased play, or noise during rotation.
Q: Does SKU 985272 come pre-greased?
A: SKU 985272 bearing assembly arrives with a standard grease fill. Verify the grease type is compatible with your equipment and operating environment. Some cold storage or high-temperature applications require specialized grease selection.
