A000003550

Frequently Asked Questions

Q: What type of tire is the A000003550 and where does it mount?
A: The A000003550 is a polyurethane drive tire with a carbon steel hub, designed for the drive wheel position on electric forklifts and pallet jacks. It provides traction and load support at the powered wheel location where torque is applied.

Q: What material is the hub made from?
A: The hub is fabricated from carbon steel manufactured to ASTM A36 specifications, ensuring adequate strength for mounting to the drive axle and distributing load forces during warehouse operation.

Q: What are the performance characteristics of the polyurethane tread?
A: The polyurethane tread provides high load capacity, abrasion resistance, and good traction on warehouse floors. Polyurethane tires perform well in both dry and wet environments, including cold storage areas, and resist cracking and degradation from extended exposure to moderate temperatures.

Q: Is the A000003550 a bolt-on assembly?
A: Yes, this tire assembly uses a standard bolt-on hub design. Verify the bolt pattern, hub diameter, and axle bore specifications against your equipment requirements before ordering to ensure proper fitment.

Q: How long does the polyurethane tread typically last?
A: Service life depends on load weight, cycle frequency, floor surface, and operating temperature. In typical warehouse conditions, polyurethane drive tires last 2 to 4 years. Tires operating in cold storage or on abrasive concrete may wear faster. Monitor tread depth and replace when wear becomes visible.

Q: What maintenance is required for this tire assembly?
A: Keep the tire clean and free of oil residue, which can soften polyurethane. Periodically check hub bolts for tightness, as vibration from the drive wheel can loosen fasteners over time. Inspect the tire for cuts, chunks, or uneven wear patterns, which indicate misalignment or bearing problems. Store unused tires in a cool, dry location away from direct sunlight.