Bar, Tie 48 for Pallet Jacks

Frequently Asked Questions

Q: What is the purpose of the A000035659 bar tie 48 in pallet jack mast assemblies?
A: The A000035659 bar tie 48 is a structural reinforcement member that connects parallel mast sections, preventing lateral deflection and maintaining vertical alignment under load. It distributes side loads across multiple mast columns and enhances overall structural rigidity.

Q: Which pallet jack and lift truck models use the A000035659 bar tie 48?
A: This tie bar is compatible with Crown, Toyota, Raymond, Yale, Hyster, CAT, and similar manual and electric pallet jacks with 48-inch load centers or mast widths. Confirm the mounting hole spacing and bar diameter match your equipment specifications.

Q: What material and dimensions characterize the A000035659 bar tie 48?
A: The tie bar is typically a hollow or solid steel tube approximately 1.5 to 2.5 inches in diameter and 48 inches in length. Material is cold-rolled or seamless steel tubing with sufficient wall thickness to resist bending under rated load without permanent deformation.

Q: What are the failure symptoms of a damaged A000035659 bar tie 48?
A: Symptoms include visible bending or bowing of the tie bar, cracking or welding separation at the mounting points, sideways wobble or racking of the mast assembly, and uneven wear on the wheels. These indicate reduced structural integrity and compromised load stability.

Q: How often should the A000035659 bar tie 48 be inspected for damage?
A: Inspect the tie bar every 6 to 12 months during routine mast maintenance. In high-cycle or outdoor environments, increase inspection frequency to quarterly. Look for bending, corrosion, crack initiation at welds, and looseness at mounting brackets. Replace if permanent deformation is visible.