Product Description
GWK-LM25-LW Load Wheel Kit engineered for American Lifts Little Mule HU25T pallet jack. Kit includes ultra-polyurethane load wheels (80 mm x 70 mm, 70 Shore D), ball bearings, steel axles, and zinc-plated lock nuts. Rated capacity: 5500 lbs. Direct OEM replacement for HU25T series. Not for low profile trucks.
Compatibility: Fits pallet jacks made by American Lifts, model Little Mule. Alternate model: LittleMule. SKU: GWK-LM25-LW
Specifications
Material & Construction
| Wheel Material | Ultra-polyurethane |
| Wheel Finish | Machined, non-marking |
Part Numbers & Compatibility
| OEM Part Number | GWK-LM25-LW |
| Compatible Models | HU25T hand pallet jack (American Lifts Little Mule) |
Performance
| Traction Rating | High traction – suitable for heavy-duty industrial environments |
Frequently Asked Questions
Q: What is the load capacity of the GWK-LM25-LW load wheel kit?
A: The GWK-LM25-LW is rated for a 5500-pound load capacity. This rating applies to the complete assembly including the ultra-polyurethane wheels and SAE steel axles. Do not exceed 5500 pounds or jack structural integrity and bearing life will be compromised.
Q: Does the GWK-LM25-LW fit the Little Mule HU25T pallet jack?
A: Yes. The GWK-LM25-LW is a direct OEM replacement engineered for the American Lifts Little Mule HU25T hand pallet jack. It is not compatible with low-profile truck variants or other Little Mule models. Verify your jack serial number or nameplate matches HU25T before installation.
Q: What are the wheel dimensions and traction properties?
A: The GWK-LM25-LW wheels are 80 mm diameter by 70 mm width, machined ultra-polyurethane with non-marking finish. The material composition delivers high traction suitable for heavy-duty industrial warehouse environments, concrete floors, and outdoor surfaces. The finish does not stain or mark sealed floors.
Q: Can I upgrade from another wheel kit to the GWK-LM25-LW?
A: Only if you are upgrading to a Little Mule HU25T from the same series. The GWK-LM25-LW is not a cross-brand upgrade kit. If your current jack is a different model, dimensions and bore tolerances will not match, causing unsafe operation. Verify model compatibility before purchase.
Q: What is the installation procedure for the GWK-LM25-LW kit?
A: Remove the existing wheels by unbolting the zinc-plated lock nuts and sliding out the worn axles. Insert the new SAE steel axles and secure with the provided zinc-plated lock nuts. Hand-tighten first, then use a wrench to snug firmly. Do not apply excessive force as over-tightening can damage ball bearings.
Q: What maintenance does the GWK-LM25-LW require?
A: Inspect wheels monthly for flat spots, cracks, or debris embedded in the polyurethane. Clean the axles and check that lock nuts remain tight. The sealed bearings are pre-lubricated and require no additional greasing. Replace wheels if diameter loss exceeds 10 percent or if structural damage occurs.