Product Description
The Atlas AT 101/210-B-ST steering wheel assembly is a direct replacement component engineered for Atlas AA-5 manual pallet jacks. This wheel features a sealed 3/4 inch ball bearing, durable nylon hub, and polyurethane tread, combining reliability with cost efficiency. Rated for 1200 lbs static load per wheel, it delivers dependable performance in warehouse and material handling environments.
Specifications
Part Numbers
| Manufacturer Part Number | AT 101/210-B-ST |
| Direct Replacement Part Number | AT 101/210-B-ST |
| Cross-Reference Part Numbers | Atlas AA-5, AA5, AA 5 |
Specifications
| Bearing Type | Sealed Ball Bearing, 3/4 inch |
| Hub Material | Nylon |
| Tread Material | Polyurethane |
| Static Load Capacity | 1200 lbs per wheel |
| Bearing Serviceability | Factory-sealed, not serviceable; entire assembly requires replacement if bearing fails |
| Compatible Equipment | Atlas AA-5 manual pallet jacks |
Frequently Asked Questions
Q: What are the differences between the AT 101/210-B-ST and AT 101/210-B-HD models?
A: The AT 101/210-B-ST features a nylon hub, while the AT 101/210-B-HD uses an aluminum hub. Both include 3/4 inch sealed ball bearings and polyurethane tread. The nylon design offers excellent cost value while maintaining the same 1200 lbs static load rating for Atlas AA-5 pallet jacks.
Q: Is the bearing in this wheel replaceable?
A: No. The bearing arrives factory-sealed and pre-installed in the nylon hub. It is not serviceable or replaceable. If bearing failure occurs, the entire wheel assembly must be replaced.
Q: Which pallet jack models is the AT 101/210-B-ST compatible with?
A: This wheel is designed exclusively for Atlas AA-5 manual pallet jacks (also referenced as AA5 or AA 5). Do not use on equipment from other manufacturers. Always verify your pallet jack documentation shows Atlas model AA-5 before ordering.
Q: What tread material does this wheel use?
A: The AT 101/210-B-ST uses high-durability polyurethane tread bonded to the nylon hub. This combination provides excellent grip and even load distribution suitable for standard warehouse and material handling operations.
Q: What is the weight load rating per wheel?
A: Each AT 101/210-B-ST wheel is rated for 1200 lbs static load when properly installed on a compatible Atlas AA-5 pallet jack with intact bearing seals.
Q: Should this wheel be stored in any special way?
A: Store in a clean, dry environment away from extreme heat or moisture. Keep sealed bearings protected from dust and debris. Store wheels upright or suspended to prevent flat-spotting of the tread.
Q: How can I tell if my pallet jack uses this wheel?
A: Check your pallet jack's model plate or serial number documentation. Verify it shows Atlas model AA-5. The wheel part number AT 101/210-B-ST should also appear in your equipment's parts manual or specification sheet.