Product Description
Axle, Steer Wheel
Frequently Asked Questions
Q: What is the GW 431 steer wheel axle used for?
A: The GW 431 is a steering wheel axle assembly for manual pallet jacks. It connects the steer wheel to the frame and allows directional control during operation. This part is essential for smooth turning and maneuverability under load.
Q: Is the GW 431 compatible with all manual pallet jack models?
A: No. The GW 431 is designed for specific pallet jack models and frame configurations. Always verify your jack model and serial number against the parts diagram before ordering. Compatibility depends on frame width, axle diameter, and wheel bearing type.
Q: How do I diagnose a failing GW 431 axle?
A: Signs of axle failure include: grinding or squeaking sounds when turning, stiff or unresponsive steering, visible wobbling of the steer wheel, or resistance when trying to pivot the jack. A failed axle makes the jack unsafe to operate and must be replaced immediately.
Q: What tools do I need to replace a GW 431 axle?
A: You will need a socket wrench set, circlip pliers (or snap ring pliers), a rubber mallet, and possibly a bearing puller if bearings are pressed onto the axle shaft. The jack must be fully lowered and secured on a level surface before starting removal.
Q: What are the specifications for the GW 431 steer wheel axle?
A: Specifications vary based on pallet jack model. Typical GW 431 axles have standard metric or SAE diameter shafts, standard 6200-series or 6300-series ball bearings, and accommodate wheels ranging from 75mm to 100mm diameter. Verify exact dimensions in your equipment manual.
Q: How long does a GW 431 axle typically last?
A: Under normal operating conditions (8-hour work shift, moderate loads), a GW 431 axle lasts 2 to 4 years. Heavy use, wet environments, or lack of maintenance reduces lifespan significantly. Regular lubrication of bearings extends axle life and prevents premature wear.