HY 1328628

Frequently Asked Questions

Q: What is the HY 1328628 bearing size and what equipment does it fit?
A: The HY 1328628 is a 25mm diameter bearing designed for Hyster model 6600 pallet jacks. This bearing is used in the load wheel or caster assembly depending on configuration. Verify your equipment model matches the 6600 designation before ordering to ensure fitment.

Q: What material and load rating does the HY 1328628 bearing have?
A: The HY 1328628 is a steel ball bearing with sealed or shielded design for warehouse use. It is rated for standard duty pallet jack applications with typical 5000 pound load capacity per jack. The bearing is not rated for industrial production line speeds or continuous operation environments.

Q: Is the HY 1328628 bearing suitable for wet or cold storage environments?
A: The HY 1328628 is a standard sealed bearing suitable for typical warehouse conditions but not specifically rated for continuous wet or freeze environments. For cold storage or wet floors, verify seal type and request temperature specification from the manufacturer to confirm suitability.

Q: When should the HY 1328628 bearing be replaced?
A: Replace the HY 1328628 bearing when you notice grinding noise, wheel wobble, or increased resistance during operation. Under normal warehouse use, this bearing typically lasts 2 to 3 years. Contamination from dirt or water shortens bearing life significantly.

Q: Are there cross-reference part numbers for the HY 1328628?
A: The HY 1328628 is an OEM Hyster bearing. Aftermarket equivalent 25mm sealed ball bearings may fit but verify bore size, outer diameter, width, and load rating match specifications. Do not assume generic 25mm bearings are direct substitutes without dimensional confirmation.