Product Description
BEARING ASSY-10 PER SLEEVE, 250 PER BOX
Frequently Asked Questions
Q: What is the packaging quantity for SKU 00591-04615-81?
A: SKU 00591-04615-81 is supplied as a ball bearing assembly in sleeves of 10 units, with 250 assemblies per box (25 sleeves). This standard packaging supports high-volume replacement programs for fleets or warehouses with multiple pallet jacks.
Q: Which equipment brands does SKU 00591-04615-81 fit?
A: This bearing assembly is compatible with manual pallet jack load wheel applications from multiple OEM manufacturers including Toyota, Crown, Raymond, and Yale. Before ordering, measure your axle bore and existing bearing dimensions to confirm fitment with your specific equipment model.
Q: What is the material construction of SKU 00591-04615-81?
A: This bearing assembly uses hardened steel races and steel ball elements. Hardened steel provides the wear resistance needed in material handling load wheel applications where sustained rolling and radial loads are continuous. The steel construction ensures the bearing raceway resists permanent deformation under load.
Q: How do I install SKU 00591-04615-81 on a load wheel axle?
A: Install this bearing using a hydraulic press or bearing installation tool. Press the bearing fully onto the axle shaft until it seats against the shaft shoulder. Do not force the bearing by hand or hammer, as this can damage the raceway. Ensure the axle is clean and undamaged before installation. Have a qualified technician perform this work if you lack proper equipment.
Q: What maintenance schedule is needed for SKU 00591-04615-81?
A: Inspect bearings every 6 months during standard warehouse operations. Check grease condition and bearing cleanliness. Reapply bearing grease as needed to maintain lubrication without overfilling. In wet, cold, or high-dust environments, increase inspection frequency to every 3 months. Clean the bearing exterior before adding grease to avoid introducing contaminants.
Q: When should I replace SKU 00591-04615-81?
A: Replace the bearing if the wheel becomes difficult to spin, you hear grinding or squealing sounds, the bearing shows rust or corrosion, or the wheel has side-to-side play. In typical warehouse use, you can expect 2 to 5 years of service life. Cold storage and wet environments may shorten this. Do not wait for complete failure, as it can damage the wheel and axle.