Product Description
Crown CR 065081-016 is an OEM ball bearing with a 1.574 inch outer diameter and 0.669 inch inner diameter, designed for use in Crown manual pallet jacks. This hardened steel open-type bearing is engineered for load tray assemblies on PTH series models.
Compatibility: Fits pallet jacks made by Crown, model CR 065081-016. Alternate model: CR065081016; CR 065081 016. SKU: CR 065081-016
Specifications
Material & Construction
| Bearing Material | Hardened steel |
Part Numbers
| OEM Part Number | CR 065081-016 |
| Manufacturer Part Number | 065081-016 |
Frequently Asked Questions
Q: What are the dimensions of the CR 065081-016 bearing?
A: The CR 065081-016 has a 1.574 inch outer diameter, 0.669 inch inner diameter, and is an open-type deep groove ball bearing. It is constructed from hardened steel with ground finish races.
Q: Which Crown manual pallet jack models use the CR 065081-016?
A: The CR 065081-016 is engineered for Crown manual pallet jacks, specifically for load tray assemblies on PTH series models. Verify your equipment model designation matches the PTH series and check your manual for exact bearing location before ordering.
Q: Why is the CR 065081-016 open-type instead of sealed?
A: Open-type bearings are used in load tray assemblies where regular re-greasing is practical and preferred over sealed designs. The open configuration allows technicians to access the bearing and apply fresh grease at scheduled maintenance intervals, extending bearing life and maintaining optimal performance. Manual pallet jacks in warehouse environments benefit from this approach.
Q: What maintenance schedule is recommended for the CR 065081-016?
A: As an open-type bearing, the CR 065081-016 requires periodic greasing. In normal warehouse operation, inspect the load tray assembly and bearing every 2 to 3 months. If grease appears discolored, contaminated, or depleted, clean the bearing and repack with NLGI grade 2 multipurpose lithium grease. More frequent lubrication may be needed in high-cycle or outdoor environments.
Q: How long does the CR 065081-016 bearing typically serve in PTH series equipment?
A: Service life for the CR 065081-016 in load tray duty typically ranges from 3 to 7 years in standard warehouse use, depending on load frequency and maintenance practices. Replace the bearing if you notice excessive play in the tray assembly, grinding noise during load-raise cycles, or if bearing races show visible scoring or corrosion during inspection.
Q: What are the alternate part number designations for the CR 065081-016?
A: The CR 065081-016 may also be referenced as CR065081016 or CR 065081 016 depending on documentation formatting. Always verify the exact OEM part number CR 065081-016 on your pallet jack manual or parts diagram before ordering to avoid compatibility issues.