Product Description
CR 6201 2RS is a Crown OEM single row deep groove ball bearing with double rubber seals, used in manual pallet jack wheels and support rollers. Dimensions are 12 mm bore diameter, 32 mm outside diameter, and 10 mm width, manufactured from SAE 52100 chromium steel with standard radial clearance.
Compatibility: Fits pallet jacks made by Crown, model 6201. SKU: CR 6201 2RS
Specifications
Material & Construction
| Seal Material | Synthetic nitrile rubber |
| Cage Material | Pressed steel |
Mechanical Specifications
| Closure Type | Double rubber seal (2RS) |
| Dynamic Load Rating | 9.95 kN (2240 lbf) |
| Static Load Rating | 4.55 kN (1020 lbf) |
| Maximum Shaft Speed | 19,000 RPM (grease lubrication) |
Part Numbers
| OEM Part Number | CR 6201 2RS |
| Manufacturer Part Number | 6201-2RS |
| Cross-Reference Part Numbers | Industry interchange: 6201-2RS, matches Crown OEM usage for manual pallet jacks; no supersession or replacement part numbers published by Crown official or major distributors |
| Equivalent Part Numbers | 6201RS, 6201-2RSR, 180201 |
Frequently Asked Questions
Q: What are the dimensions of the CR 6201 2RS bearing?
A: The CR 6201 2RS has a 12 mm bore diameter, 32 mm outside diameter, and 10 mm width. These dimensions match the industry standard 6201 series bearing geometry for manual pallet jack wheels and support rollers.
Q: Which pallet jacks is the CR 6201 2RS compatible with?
A: CR 6201 2RS is the Crown OEM deep groove ball bearing for manual pallet jacks using 6201-series wheels. Fits Crown manual pallet jack models specified with this bearing size. Verify bore and outside diameter match your wheel assembly before ordering.
Q: What does the 2RS designation mean?
A: 2RS indicates double rubber seals on both sides of the bearing. This provides protection against contamination and moisture in warehouse and outdoor environments while retaining factory-supplied grease.
Q: What material is the CR 6201 2RS made from?
A: CR 6201 2RS is manufactured from SAE 52100 chromium steel with standard radial clearance. This material provides durability and precision performance under the load cycles typical of manual pallet jack operation.
Q: Are there cross-reference part numbers for the CR 6201 2RS?
A: Industry interchange bearing 6201-2RS matches Crown OEM usage for manual pallet jacks. Cross-references include equivalent part numbers 6201-2RS from other bearing manufacturers. Verify seal type and clearance specifications match your wheel assembly before substituting.
Q: How long does the CR 6201 2RS bearing typically last?
A: Under normal warehouse duty cycles, CR 6201 2RS bearings provide service life of several years. Replace if you observe wheel roughness, noise, or wobble during operation. Regular inspection helps identify worn bearings before failure.