Product Description
Blue Giant BG 906-0095 load roller bracket for MT-50 manual pallet jack frame. OEM-grade carbon steel bracket mounts load roller axle, accepting standard roll pin. Designed for 3.0–3.25 inch load roller assemblies; finished with industrial powder coat. Compatible exclusively with Blue Giant MT-50 pallet trucks.
Compatibility: Fits pallet jacks made by Blue Giant, model MT-50. Alternate model: MT50; MT 50. SKU: BG 906-0095
Specifications
Material
| Bracket Material | Carbon steel, per ASTM A36 specification |
| Bracket Hardness | Brinell 140 minimum |
| Bracket Finish | Industrial powder coat |
Part Numbers
| OEM Part Number | BG 906-0095 |
| Manufacturer Part Number | 906-0095 |
Frequently Asked Questions
Q: What material is the BG 906-0095 load roller bracket made from?
A: BG 906-0095 is manufactured from carbon steel per ASTM A36 specification with a minimum Brinell hardness of 140. The bracket is finished with industrial powder coat to resist corrosion and wear in material handling environments.
Q: What load roller sizes does BG 906-0095 accept?
A: BG 906-0095 is designed for 3.0 to 3.25 inch load roller assemblies. The bracket mounts the load roller axle using a standard roll pin. Verify your existing roller diameter before ordering to ensure proper fitment.
Q: Which pallet jack models use the BG 906-0095 bracket?
A: BG 906-0095 fits Blue Giant MT-50 manual pallet jacks exclusively. This bracket is an OEM-grade component for MT-50 frame assemblies (also referenced as MT50 or MT 50). Do not use on other Blue Giant models without verification.
Q: Why is the powder coat finish important on the BG 906-0095 bracket?
A: The industrial powder coat provides corrosion resistance and wear protection during daily material handling operations. This finish helps extend bracket life, especially in wet or outdoor environments where bare carbon steel would rust quickly.
Q: What is the typical lifespan of a BG 906-0095 bracket in continuous use?
A: Lifespan depends on load cycles and environmental conditions. The ASTM A36 carbon steel construction and powder coat finish are designed for years of continuous industrial use. Replace if the bracket shows cracks, excessive corrosion under the finish, or deformation that affects roller alignment.
Q: Is BG 906-0095 a load-bearing structural component?
A: Yes. BG 906-0095 is a load-bearing bracket that mounts the load roller axle to the pallet jack frame. Any crack, weld failure, or deformation reduces structural integrity and must be replaced immediately to prevent load roller failure or jack instability.