Product Description
Multiton MU 19565-010 Hex Head Bolt
Direct replacement fastener for Multiton manual pallet jack models TM, M, J, and S series. M8 x 1.25mm full-thread hex head bolt, 30mm length, commercial grade steel with plain finish. Meets ISO 898-1 Class 8.8 specification with 720 MPa minimum tensile strength, providing reliable fastening for hydraulic and structural assemblies under repetitive load cycles.
Specifications
Fastener Dimensions
| Thread Size | M8 x 1.25mm |
| Length | 30 mm |
| Thread Coverage | Full thread |
| Head Style | Hex head |
Material & Construction
| Steel Grade | Class 8.8 (ISO 898-1) |
| Finish | Plain finish |
| Minimum Tensile Strength | 720 MPa (per ISO 898-1 Class 8.8) |
Compatibility & Cross-Reference
| Manufacturer Part Number | MU 19565-010 |
| Original Equipment Compatible Part Number | MU 19565-010 |
| Equivalent Part Number | MT19565-010 |
| Cross-Reference Part Numbers | MU 19565010, MU 19565 010, MT19565-010 |
| Compatible Equipment | Multiton manual pallet jack models TM, M, J, S series |
Frequently Asked Questions
Q: What pallet jacks does the MU 19565-010 bolt fit?
A: The MU 19565-010 is a fastener for Multiton manual pallet jack models TM, M, J, and S series. Verify your equipment model and application location before ordering, as different assembly points may require different bolt types.
Q: What are the exact bolt specifications?
A: M8 x 1.25mm, full-thread hex head fastener, 30 mm long. Commercial grade steel with plain finish. Meets ISO 898-1 Class 8.8 specification with minimum tensile strength of 720 MPa.
Q: Are there alternate part numbers for this bolt?
A: Alternate model numbers include MU 19565010 (no hyphens), MU 19565 010 (space-separated), and cross-reference MT19565-010. These all reference the same fastener component. Use the exact part number MU 19565-010 when ordering to avoid confusion.
Q: Why is Class 8.8 strength important for this bolt?
A: Class 8.8 specification ensures this bolt can withstand the structural loads and vibration typical in hydraulic pallet jack assemblies. The 720 MPa tensile strength provides reliable fastening under the dynamic stress of lift and lower cycles without shearing or loosening.
Q: What is the plain finish and does it require coating?
A: Plain finish means no protective coating (zinc, oil, or other treatment). This finish is standard for internal fasteners in sealed hydraulic assemblies. Do not substitute this bolt with galvanized or other coated versions, as coating thickness may prevent proper fit in threaded holes.