Product Description
Horn 24v, 110db
Frequently Asked Questions
Q: What are the electrical specifications for the BR 28700-281 horn?
A: The BR 28700-281 is a 24-volt DC horn rated at 110 decibels. It is designed for 24V electric lift truck systems and requires direct connection to the 24V battery circuit via the control switch. Operating voltage must be 24V DC; do not use with 12V or 48V systems.
Q: Is the BR 28700-281 horn loud enough for outdoor dock operations?
A: At 110 decibels, the BR 28700-281 meets OSHA standards for material handling equipment warnings and is suitable for both indoor and outdoor dock operations. It provides adequate audible warning in typical warehouse noise levels. If operation in very high-noise environments is required, verify compatibility with your facility standards.
Q: Which electric lift truck models use the BR 28700-281 horn?
A: The BR 28700-281 is compatible with 24V electric pallet jacks, walkie trucks, and rider lift trucks from Crown, Toyota, Raymond, and Hyster. It fits standard horn mounting brackets on most electric lift truck models. Verify your equipment operates on 24V before ordering.
Q: How do I verify the BR 28700-281 horn is functioning properly?
A: Activate the horn button on your control panel; the horn should sound immediately and continuously while the button is pressed. A weak or intermittent sound indicates low battery charge or loose connections. A complete absence of sound indicates either no power reaching the horn or an internal component failure requiring replacement.
Q: What is the current draw of the BR 28700-281 horn?
A: The BR 28700-281 horn draws approximately 15-20 amps at 24V during operation. This load is within the capacity of standard battery charger systems for 24V lift trucks. Excessive horn use will reduce battery run time; use the horn only for required safety warnings.