Product Description
Prime Mover PR 308030-000 is a factory replacement handle-mounted switch designed for use in Prime Mover electric lift trucks. It is an OEM-grade, momentary contact push-button switch installed in the control handle assembly for the actuation of electrical functions in electric pallet jacks such as the SMX45 Walkie. No cross-reference part numbers are currently documented from manufacturer sources.
Compatibility: Fits pallet jacks made by BT Prime Mover, model SMX 45 Walkie Pallet Truck. SKU: PR 308030-000
Specifications
Compatibility
| Compatible Models | Supports models including SMX45 Walkie (referenced in Prime Mover technical documentation) |
Material
| Construction | Industrial duty plastic actuator and housing designed for equipment environments |
Part Numbers
| OEM Part Number | PR 308030-000 |
| Manufacturer Part Number | 308030-000 |
| Alternate Part Number | PM308030-000 |
Performance
| Service Duty | Rated for frequent operational cycles in material handling environments |
Frequently Asked Questions
Q: What is the voltage and contact rating for the PR 308030-000 handle-mounted switch?
A: The PR 308030-000 is a momentary contact push-button switch designed for low-voltage control circuits in electric lift trucks. The switch handles control voltages typical of Prime Mover SMX 45 Walkie pallet truck circuits. Contact current and switching duty specifications are determined by the solenoid or coil load it energizes.
Q: Which Prime Mover models does the PR 308030-000 fit?
A: The PR 308030-000 is designed for the Prime Mover SMX 45 Walkie Pallet Truck. This switch is factory-installed in the control handle assembly for actuation of electrical functions such as solenoid engagement, brake release, or load control. Verify your truck model documentation before ordering, as handle switch designs vary across Prime Mover product lines.
Q: What material construction does this switch have, and is it rated for industrial duty?
A: The PR 308030-000 uses industrial duty plastic actuator and housing designed for repeated operator contact and vibration in electric lift truck applications. The plastic construction resists corrosion from moisture and forklift washing. Momentary contact design reduces wear on internal switch contacts compared to maintained contact switches.
Q: What electrical functions does this switch control on the SMX 45 Walkie?
A: The PR 308030-000 handle-mounted switch actuates electrical functions in the SMX 45 control circuit. These functions typically include solenoid engagement for tilt, load control, or brake release. The exact function depends on switch position in the handle harness and the solenoid load it energizes. Consult the truck wiring schematic for specific function mapping.
Q: How long does this switch typically last before replacement, and what are failure symptoms?
A: A momentary contact push-button switch in warehouse duty typically lasts 3-5 years before internal contact wear causes intermittent function. Failure symptoms include erratic solenoid engagement, requiring multiple button presses to activate a function, or a complete loss of response to button input. If the truck shows intermittent control function, test the switch continuity with a multimeter before replacing.
Q: Are there cross-referenced switch part numbers for the PR 308030-000?
A: The alternate part number PM308030-000 references the same switch. This is an OEM-specific switch designed for Prime Mover SMX 45 circuits and does not cross-reference to other manufacturer handle switches. Ensure exact part number matching before ordering as switch terminal configuration and contact ratings are model-specific.