BT seal kit for pallet jacks
2501-103465
Guaranteed Fit. Check fit with us before you buy. If we confirm it fits your machine and it doesn’t, we’ll exchange or refund it: no restocking fee, return shipping on us. How it works
Not sure it fits? Send us your make, model and serial number and we’ll check it before you buy.
Couldn't load pickup availability
- Expert support & fitment help
- 30-day returns
- Fast Shipping
Compatibility
|
Make |
|
|---|---|
|
Model |
- |
Visit our diagram page for part references to popular models
Product Description
2501-103465 BT Seal Kit is an OEM-grade hydraulic seal replacement kit designed for manual pallet jack pump pistons, compatible with BT models. Constructed from high-performance polyurethane and nitrile rubber, the kit restores hydraulic integrity, supports working pressures up to 3000 PSI, and fits cylinders with a 2.50-inch bore. No cross-reference part numbers are available for this kit.
Specifications
Material & Construction
| Material | High-performance polyurethane and nitrile rubber |
Part Numbers & Compatibility
| Make | BT |
| Manufacturer Part Number | 2501-103465 |
Additional Specifications
| Hydraulic System Working Pressure | Rated to 3000 PSI maximum working pressure |
| Seal Orientation | U-cup seal installed with wide side facing pressure source; wiper seal lip facing outwards |
| Seal Hardness | Shore A 85 |
| Leakage Rate | Less than 1 cc/min at 2500 PSI |
Frequently Asked Questions
Q: What models is the 2501-103465 seal kit compatible with?
A: The 2501-103465 is compatible with BT manual pallet jacks.
Q: What materials are used in the 2501-103465 seal kit?
A: The kit uses high-performance polyurethane and nitrile rubber construction. These materials resist hydraulic fluid exposure and maintain integrity under operating conditions.
Q: When should the 2501-103465 seal kit be replaced?
A: Replace the seal kit when you observe slow descent, internal leakage, or inability to hold pressure on BT equipment. Worn seals reduce pump efficiency and system reliability. Kit replacement restores original system performance.
Q: How should the seals in the 2501-103465 kit be oriented during installation?
A: The u-cup seal must be installed with the wide side facing the pressure source. The wiper seal lip faces outward. Correct orientation is critical for hydraulic system performance and leak prevention.