Product Description
CHAIN CONNECTOR
Frequently Asked Questions
Q: What manual pallet jacks use chain connector 800075691?
A: Chain connector 800075691 is used in manual hydraulic pallet jacks from Crown, Toyota, Raymond, Yale, and Clark. The connector joins chain sections or connects chain to hydraulic pump linkage. Verify your equipment model uses this connector specification.
Q: What are the specifications for chain connector 800075691?
A: Chain connector 800075691 is a hardened steel link or pin designed to withstand hydraulic load transmission stress. The connector bore size, working load rating, and material composition match the chain specifications. Contact us for exact dimensional data for your equipment model.
Q: What causes chain connector failure?
A: Chain connectors fail from rust and corrosion in wet environments, metal fatigue under cyclic load stress, shear failure if the connector bore wears oversized, or breaking under excessive load. A deformed or broken connector cannot be repaired and must be replaced.
Q: How long does a chain connector typically last?
A: A properly maintained chain connector lasts 4 to 6 years under normal operating conditions. Lifespan varies based on load cycles and environmental exposure. In wet or corrosive environments, replacement may be needed within 1 to 2 years. Inspect connectors annually for rust or deformation.
Q: Are there cross-reference part numbers for connector 800075691?
A: Cross-reference 800075691 with your pallet jack manufacturer parts diagram or contact us with your equipment model and serial number. Crown, Toyota, Raymond, and Yale use equivalent connectors under different internal part codes.
Q: What maintenance prevents chain connector failure?
A: Keep the connector clean and lubricated with hydraulic oil or chain oil to prevent rust. In wet environments, apply rust inhibitor monthly. Inspect quarterly for rust, deformation, or movement at the connector joint. Replace a corroded or deformed connector before it fails under load.