Product Description
This complete wheel kit is designed for pallet jack owners needing replacements for worn-out wheels. It includes two Ultra-Poly (70D) load wheel assemblies and two poly steer wheel assemblies, complete with bearings, axles, and fasteners for easy installation. The durable, non-marking ultra-poly load wheels are made to last longer than standard polyurethane options, while the poly steer wheels ensure quiet operation and floor protection.
Compatibility: Fits pallet jacks made by Dayton, model 4YX96. SKU: GWK-4YX96-CK
Specifications
Material & Construction
| Load Wheel Material | Ultra-Polyurethane, 70D durometer |
| Steer Wheel Material | Polyurethane tread bonded to nylon core |
| Fastener Material | Plated steel |
Part Numbers & Compatibility
| OEM Part Number | GWK-4YX96-CK |
| Compatible Models | Dayton 4YX96 Manual Pallet Jack |
Frequently Asked Questions
Q: What Dayton models does GWK-4YX96-CK fit, and how do I verify compatibility?
A: GWK-4YX96-CK is designed for Dayton model 4YX96 manual pallet jacks. Verify your jack model number by checking the manufacturer nameplate, usually located on the frame or hydraulic pump. If the model reads 4YX96 exactly, this kit is correct. Do not guess on compatibility. Contact the supplier or Dayton directly if the model number is worn or unclear. Installing the wrong wheel kit can cause steering problems and safety hazards.
Q: Does GWK-4YX96-CK include both load and steer wheels, or only one type?
A: GWK-4YX96-CK is a complete wheel kit (CK suffix = complete kit). It includes two 70D ultra-poly load wheel assemblies and two polyurethane steer wheel assemblies, complete with bearings, axles, and fasteners. All components are pre-assembled and ready to install. This full replacement ensures consistent performance across all wheels and eliminates mixed-durometer issues that can cause uneven rolling.
Q: What is the material composition of the steer wheels, and why are they softer than load wheels?
A: Steer wheels in GWK-4YX96-CK have polyurethane tread bonded to a nylon or composite core. This material is softer than the 70D ultra-poly load wheels and is intentional. Softer steer wheels reduce the effort required to turn the jack and decrease strain on the steering mechanism. They also provide slightly better floor grip for directional control. Do not substitute load wheels for steer wheels; it will make steering very difficult.
Q: How do I know if my steer wheel assembly has a nylon or composite core?
A: Examine the wheel cross-section or look at the inner hub. Nylon cores are cream or white colored and visible if the wheel is cut or if you look at the bore. Composite cores are darker or gray. Both materials are acceptable and perform similarly. The material matters less than ensuring the wheel is properly seated on the axle and the bearing spins freely. If you need the exact core material, check the product specification sheet or contact the supplier.
Q: What fastener material is used in GWK-4YX96-CK, and is corrosion a concern?
A: Fasteners in GWK-4YX96-CK are plated steel, typically zinc-plated for corrosion resistance. If your jack operates indoors in a dry environment, fasteners should remain corrosion-free for the lifetime of the wheels. If the jack is stored outdoors, in a wet warehouse, or in coastal environments, inspect fasteners quarterly. If rust develops, remove and replace with stainless steel fasteners of the same size. Check torque spec from the original fastener package.
Q: What is the installation sequence, and are there any safety precautions?
A: Installation sequence: (1) Ensure the jack is fully lowered and parked on level ground with load removed. (2) Lock out the jack or place blocks to prevent accidental lifting. (3) Remove fasteners and old wheels (one side at a time to maintain stability). (4) Install new wheels and tighten fasteners in a cross pattern (opposite sides first) to ensure even seating. (5) Test roll the jack freely before loading. (6) Verify no fastener is loose after 8 hours of operation. Do not operate the jack until all wheels are installed and fastened.