Product Description
GWK-HP25L-T-CK Complete Wheel Kit (Tandem) for Hu Lift manual pallet jacks, compatible with HP25L models. Features ultra-poly 70D load wheels, polyurethane steer wheels, precision sealed ball bearings, hardened steel axles, and zinc plated steel fasteners. Ideal for heavy-duty manual pallet truck wheel replacement requirements.
Compatibility: Fits pallet jacks made by Hu Lift, model HP25L. SKU: GWK-HP25L-T-CK
Specifications
Part Numbers & Compatibility
| Manufacturer Part Number | GWK-HP25L-T-CK |
Wheel Assembly Components
| Load Wheel Assemblies | Ultra-Poly material, 70D durometer hardness |
| Steer Wheel Material | Polyurethane construction with integrated bearing assemblies |
Frequently Asked Questions
Q: Is GWK-HP25L-T-CK the correct complete wheel kit for my Hu Lift tandem manual pallet jack?
A: Yes. GWK-HP25L-T-CK is engineered specifically for HP25L tandem wheel configuration. The complete kit includes dual ultra-poly 70d load wheels, polyurethane steer wheels, precision sealed ball bearings, hardened steel axles, and zinc-plated fasteners. Direct fit with no modifications required.
Q: What is a tandem wheel configuration, and why is GWK-HP25L-T-CK different from GWK-HP25L-CK?
A: Tandem configuration uses dual wheels at each axle point for increased weight distribution and stability during heavy-duty material handling. GWK-HP25L-T-CK provides multiple wheel assemblies and reinforced fastening hardware for this dual-wheel setup. Standard GWK-HP25L-CK is for single-wheel configuration. Using the wrong kit causes misalignment and overload.
Q: What load capacity does GWK-HP25L-T-CK support for heavy-duty applications?
A: GWK-HP25L-T-CK wheels are rated for the full HP25L nameplate capacity, typically 2500 to 5500 pounds. Dual wheels distribute load evenly across both wheel sets, reducing per-wheel stress compared to single configuration. This provides enhanced durability for continuous heavy-duty warehouse and dock operations.
Q: Are hardened steel axles and sealed ball bearings pre-installed on GWK-HP25L-T-CK?
A: Yes. All wheels come factory-assembled with precision sealed ball bearings and hardened steel axles pre-installed. Fastening hardware is zinc-plated steel. The entire kit is pre-assembled for direct installation. No additional bearing, axle, or hardware installation is needed unless original components are damaged.
Q: How do I install GWK-HP25L-T-CK wheels on my tandem HP25L jack?
A: Raise the jack with a lift or stand. Remove cotter pins and axle nuts from existing wheels. Carefully pull off worn wheel assemblies. Clean axles and hubs. Install new GWK-HP25L-T-CK wheel assemblies by sliding them onto axles, ensuring proper seating. Tighten axle nuts and install new cotter pins. Test steering and load handling before use. Do not operate without cotter pins.
Q: How often should I inspect and maintain GWK-HP25L-T-CK wheels in heavy-duty operations?
A: Inspect wheels every 3 months in heavy-duty continuous-use environments. Check for flat spots, chunks missing from wheel edges, cracks in polyurethane, or bearing noise. Verify all cotter pins remain installed and axle nuts are tight. Replace wheels if flat spots exceed 0.125 inches or if bearings make grinding or clicking sounds. Regular inspection extends jack service life and prevents sudden failure.