Battery Connectors for Toyota, Raymond, BT, Prime Mover, Advance, American Lincoln, and
00591-08789-81
Couldn't load pickup availability
- Expert support & fitment help
- 30-day returns
- Fast Shipping
Compatibility
|
Make |
|
|---|---|
|
Model |
- |
Visit our diagram page for part references to popular models
Product Description
CONNECTOR (SB350 2/0 RED)
Specifications
Part Numbers & Compatibility
| Make | Toyota, Raymond, BT, Prime Mover, Advance, American Lincoln, Clarke |
| Primary Application | Electric Lift Trucks, Electric Pallet Jacks, Battery Connections |
Electrical Specifications
| Connector Type | SB350 Series Battery Terminal |
| Amperage Capacity | High-Amperage Rated |
Performance Specifications
| Gauge Rating | 2/0 AWG |
Additional Specifications
| Polarity | Negative (Ground) |
| Color | Red |
| Barrel Material | Copper or Copper-Alloy with Corrosion-Resistant Plating |
| Insulation Material | Heat-Shrink Polyolefin or Rubber |
| Typical Lifespan | 5-10 Years (with proper maintenance and corrosion protection) |
| Corrosion Protection | Resistant to Battery Acid Splash; Dielectric Grease Recommended for Extended Storage |
| Compatible Manufacturers | Crown, Toyota, Raymond, Hyster, Yale |
Frequently Asked Questions
Q: What equipment is this connector compatible with?
A: This 2/0 gauge connector is designed for high-amperage negative battery connections on electric lift trucks from Toyota, Raymond, BT, Prime Mover, Advance, American Lincoln, and Clarke.
Q: What materials are these connectors made from?
A: These connectors are typically constructed from copper or copper-alloy barrel material with a corrosion-resistant plating. The insulating sleeve is made from heat-shrink polyolefin or rubber, providing excellent conductivity and resistance to battery acid splash.
Q: How should I maintain this connector for longevity?
A: To ensure long-lasting performance, apply dielectric grease to the mating surfaces after installation. In cold storage environments, inspect monthly for ice crystal formation inside the connector barrel.
Q: What tools are needed to install this connector?
A: You will need a wire stripper sized for 2/0 gauge cable, a heavy-duty crimping tool rated for 2/0 gauge lugs, and dielectric grease. Soldering is not recommended for this connector.
Q: Can this connector be used in wet or outdoor storage environments?
A: Yes, but it is important to apply dielectric grease after installation to protect against moisture and corrosion. Regular inspection is recommended in harsh environments.