Product Description
Crown CR 110613-3 contactor is an OEM lift truck component designed for 24VDC circuits with a continuous current rating of 150A. Features large contact tips and SPNO configuration. Fully cross-referenced to SW180-24, SW180-3, and 110613003. Engineered for direct compatibility with Crown PE 3000 electric lift truck applications.
Specifications
Electrical Specifications
| Coil Voltage | 24VDC |
| Continuous Current Rating | 150A at 24VDC |
| Configuration | SPNO (Single Pole Normally Open) |
| Contact Design | Large contact tips |
Part Cross-Reference Information
| Manufacturer Part Number | 110613-003 |
| Crown Part Number | CR 110613-3 |
| Cross-Reference Part Numbers | SW180-24, SW180-3, 110613003 |
Application
| Compatible Equipment | Crown PE 3000 series electric lift trucks |
Frequently Asked Questions
Q: What is the contact tip design on the CR 110613-3?
A: The CR 110613-3 features large contact tips that provide increased contact surface area, lower contact resistance, and better heat dissipation during extended operation. This design extends contact life in high-frequency switching applications.
Q: Is the CR 110613-3 a direct fit for Crown PE 3000 series trucks?
A: Yes. The CR 110613-3 is engineered for direct compatibility with Crown PE 3000 electric lift truck applications. Verify your truck model matches PE 3000 series before ordering.
Q: What cross-reference parts are equivalent to the CR 110613-3?
A: Cross-reference numbers include SW180-24, SW180-3, and 110613003. These identifiers represent the same contactor across different reference systems.
Q: What are the current and voltage ratings for continuous operation?
A: The CR 110613-3 is rated for 150A continuous at 24VDC. This continuous rating means sustained operation without duty cycle limitations, assuming proper cooling.
Q: Can I use the CR 110613-3 as a replacement for discontinued parts?
A: The CR 110613-3 can replace SW180-24, SW180-3, 110613003, and equivalent Albright SW180-4 contactors. Confirm your original part number matches one of these references before ordering.
Q: What SPNO configuration means on the CR 110613-3?
A: SPNO (Single Pole Normally Open) means one set of contacts that are open at rest. When 24VDC is applied to the control coil, contacts close and allow power to flow to the lift motor circuit.
