Product Description
CONTACTOR (36 VOLT)
Frequently Asked Questions
Q: What voltage is the CT-968-36 rated for?
A: The CT-968-36 is a 36-volt DC contactor. It is designed for three-battery 12-volt systems configured in series, or dedicated 36-volt battery packs. Do not use on 12-volt, 24-volt, or 48-volt equipment.
Q: Which lift truck models use the CT-968-36?
A: The CT-968-36 fits 36-volt electric pallet jacks, walkie stackers, and narrow-aisle lift trucks from Crown, Jungheinrich, Linde, and BT. Verify your equipment nameplate lists 36-volt before ordering.
Q: What is the maximum amp rating for the CT-968-36?
A: The CT-968-36 is rated for 600 amps continuous DC switching. Overloading causes arcing and contact damage. If your motor draws more than this, the contactor will fail prematurely.
Q: How do I test if the CT-968-36 is functioning correctly?
A: With power off, check continuity between main terminals using a multimeter. The contactor should show continuity (ohms near zero) when energized and open circuit when de-energized. No continuity indicates failure.
Q: What cross-reference part numbers are equivalent to the CT-968-36?
A: The CT-968-36 is equivalent to Crown CR-968-36, Toyota 8FG-CTR36, and Jungheinrich CU-968-36. These parts are interchangeable and share the same performance specifications.
Q: How often should the CT-968-36 be inspected or replaced?
A: Inspect the contactor every 500 operating hours or annually, whichever comes first. Replace when contacts show pitting or the truck exhibits erratic motor behavior. Most 36-volt contactors last 2 to 4 years under normal duty.