Product Description
Jet JT PT2036-1-9 Control Rod Assembly, OEM replacement component for PT2036 manual pallet jack series. Carbon steel construction, electroplated finish, direct linkage between handle and hydraulic pump release. Features metric threaded ends, designed for continuous manual actuating cycles.
Compatibility: Fits pallet jacks made by Jet, model PTW. SKU: JT PT2036-1-9
Specifications
Material & Construction
| Hardness | Rockwell B80 minimum for rod material |
Part Numbers
| OEM Part Number | JT PT2036-1-9 |
| Compatible Models | Jet PT2036 manual pallet jack series |
Frequently Asked Questions
Q: What is the JT PT2036-1-9 control rod assembly?
A: The JT PT2036-1-9 is an OEM control rod assembly for Jet PT2036 manual pallet jack series. It forms the direct linkage between the handle lever and the hydraulic pump release mechanism, transmitting manual actuation force to open and close the pressure relief valve for load lowering.
Q: What material is the JT PT2036-1-9 made from and how is it finished?
A: The JT PT2036-1-9 is constructed from carbon steel with an electroplated finish. The electroplating provides corrosion resistance in damp and outdoor storage conditions. The rod material has a minimum Rockwell B80 hardness specification for strength under continuous manual cycling.
Q: What are the key design features of the JT PT2036-1-9?
A: The JT PT2036-1-9 features metric threaded ends that connect to the handle lever and pump actuator. It is engineered for continuous manual actuating cycles without fatigue failure. The geometry maintains proper alignment and stroke length between the handle and pump for consistent lowering valve control.
Q: Can the JT PT2036-1-9 be used on non-Jet pallet jacks?
A: The JT PT2036-1-9 is specifically designed for Jet PT2036 manual pallet jack series. It is not compatible with Crown, Toyota, Raymond, or other OEM brands. Metric thread pitch and connection geometry are specific to Jet designs. Confirm your jack model before ordering.
Q: What symptoms indicate the JT PT2036-1-9 needs replacement?
A: Replace the control rod if the handle feels disconnected from the pump action, if lowering response is delayed or inconsistent, if you observe visible cracks or bending, if threads are damaged, or if the jack will not lower at all. A damaged rod breaks the mechanical connection between operator and pump.
Q: How often should the JT PT2036-1-9 be maintained?
A: The JT PT2036-1-9 requires no routine lubrication. Inspect quarterly for corrosion, cracks, or bent sections. In high-humidity or salt-air environments, clean and inspect more frequently. The electroplated finish protects against rust, but chips or scratches should be monitored.