Product Description
Shim
Frequently Asked Questions
Q: What is the thickness specification of the CR 125475-100 shim?
A: The CR 125475-100 is a precision shim designed for Crown electric lift trucks. The part number suffix indicates thickness measured in ten-thousandths of an inch, meaning .100 inches. This shim is used to adjust critical clearances in steering and load support assemblies.
Q: How does the CR 125475-100 compare to the CR 125475-088 shim?
A: Both are Crown precision shims for lift truck assembly adjustments. The CR 125475-100 is .100 inches thick while the CR 125475-088 is .084 inches thick. The .016 inch difference is critical for proper clearances. Use the exact thickness specified for your equipment model and assembly location.
Q: What applications use the CR 125475-100 shim on Crown lift trucks?
A: The CR 125475-100 is used in steering assemblies, mast pivot adjustments, and load wheel spacing on Crown electric lift trucks. Exact application depends on your equipment model and serial range. Provide your lift truck model and the assembly being serviced for confirmation.
Q: Do shims wear out or only get replaced during major service?
A: Shims do not wear in the traditional sense but must be replaced when adjacent components wear, when assemblies are rebuilt, or if shims become bent or cracked. Replacing worn components often requires new shims to restore correct clearances and alignment.