Product Description
Crown CR 73842 handle bushing for PE 3000 series electric pallet trucks. This engineering-grade thermoplastic bushing is designed for tiller arm assemblies, featuring precision dimensions of 0.906 in outer diameter, 0.787 in inner diameter, and 0.787 in width. Two bushings are required per truck to ensure smooth, responsive steering control and extended equipment life.
Specifications
Mechanical Specifications
| Rated Load Capacity | Not applicable (bushing component, non-load bearing) |
| Bore Tolerance | ±0.001 inch |
Part Numbers & Compatibility
| Manufacturer Part Number | CR 73842 |
| Compatible Equipment Model | PE 3000 Series Electric Pallet Truck |
| OEM Part Number | CR 73842 |
Frequently Asked Questions
Q: What is CR 73842 and where does it fit in the PE 3000 series truck?
A: CR 73842 is an OEM handle bushing for Crown PE 3000 series electric pallet trucks. This thermoplastic press-fit bushing is installed in the tiller arm assembly, serving as the pivot bearing surface where the steering handle connects to the truck frame. It reduces friction and wear during steering operations and is a non-load-bearing component.
Q: What are the exact dimensions of CR 73842?
A: CR 73842 dimensions: outer diameter 0.906 inch, inner diameter 0.787 inch, width 0.787 inch. These precision dimensions ensure proper fit in the PE 3000 tiller arm bore without excessive play or binding. If you are retrofitting a different truck model, verify the bore cavity dimensions match before ordering.
Q: How many CR 73842 bushings are needed per PE 3000 truck?
A: Two CR 73842 bushings are required per PE 3000 series unit, one on each side of the tiller arm assembly. They are press-fit into the frame bore and support the steering shaft. When ordering replacement bushings, ensure you order in pairs to restore full tiller functionality on both sides.
Q: What material is CR 73842 made from?
A: CR 73842 is manufactured from engineering-grade thermoplastic engineered for low-friction, low-wear operation in electric truck tiller assemblies. The thermoplastic material resists moisture, does not require lubrication, and provides smooth steering feel. This material is durable in typical warehouse temperatures ranging from 32 to 120 degrees Fahrenheit.
Q: When should CR 73842 be replaced?
A: Replace CR 73842 if the tiller exhibits excessive play (lateral movement more than 0.125 inch), binding or resistance during turning, or grinding noise from the tiller arm. Normal wear develops over 4-8 years depending on operator technique and usage intensity. If steering feels loose or unresponsive, worn bushings are a likely cause.
Q: Will CR 73842 fit other Crown electric pallet truck models?
A: CR 73842 is engineered for PE 3000 series trucks and is not interchangeable with other Crown models without verification. Different electric pallet truck series use different tiller bore dimensions and bushing specifications. Contact our technical team with your truck model number to confirm compatibility before ordering, or verify that the bore cavity dimensions match the 0.787 inch inner diameter specification.