Product Description
Crown GWK-PE4000-LW is a direct replacement load wheel kit for the PE 4000 series electric pallet truck, featuring polyurethane load wheel assemblies with axles, bearings, and fasteners for straightforward maintenance. No cross-reference part numbers are indicated in available sources. Confirm fitment with Crown documentation or parts catalog for dimensional details.
Compatibility: Fits pallet jacks made by Crown, model PE 4000. Alternate model: PE4000. SKU: GWK-PE4000-LW
Specifications
Material
| Wheel Material | Polyurethane construction |
Part Numbers
| OEM Part Number | GWK-PE4000-LW |
| Compatible Models | Fits Crown Model PE 4000 electric pallet truck |
Frequently Asked Questions
Q: Is GWK-PE4000-LW a direct OEM replacement or do I need to modify my Crown PE 4000 jack?
A: Direct OEM replacement. No modification needed. The kit is designed for plug-and-play installation on Crown PE 4000 series jacks. Axle bore diameters and mounting points match factory specifications. Simply remove old wheels and fasteners, install new kit, and torque fasteners per Crown manual.
Q: What polyurethane wheel composition comes with this kit?
A: Kit includes polyurethane load wheel assemblies. Exact durometer (Shore A hardness) and marking properties are standard for Crown PE 4000 service. For detailed durometer specification, check the product data sheet or contact your distributor to confirm if you need 95A, 97A, or another grade for your floor type.
Q: Does GWK-PE4000-LW have a documented cross-reference part number from another brand?
A: No cross-reference part numbers are indicated in available sources for GWK-PE4000-LW. This is a Crown OEM part. If you need a compatible kit from Yale, Toyota, or Hyster for equivalent PE 4000-class jacks, you will need to source the correct OEM part for that brand.
Q: What tools do I need to install this wheel kit, and how long does it take?
A: Tools: socket set (for fastener removal), adjustable wrench, and bearing puller if old bearings are pressed on. Time: approximately 30–45 minutes per jack if you are familiar with the procedure. Steps: secure jack with chocks, remove fasteners, pull old wheels and axles, install new assemblies, torque fasteners to factory spec, and test wheel rotation. Consult your Crown manual for exact torque values.
Q: How can I tell if the wheels on my PE 4000 are worn and need replacement?
A: Signs of wear: reduced jack responsiveness, jerky movement, audible squeaking or grinding, visible flat spots or cracks on wheels, or polyurethane separating from the wheel core. Perform a spin test—secure the jack and spin each wheel by hand. If resistance or wobbling is present, or if wheels do not coast freely, replacement is due.
Q: What load rating applies to this wheel kit on a PE 4000 jack?
A: Load capacity is determined by the PE 4000 jack frame and pump, not the wheels. Consult your Crown PE 4000 manual for rated load capacity (typically 4000 lb for standard PE 4000 units). Wheel replacement does not change the jack load limit. Do not exceed rated load capacity even with new wheels installed.