Product Description
The CR 065081-015 is a double-sealed, single-row deep groove ball bearing engineered for Crown electric lift trucks. This bearing features a 1.255 inch outer diameter with hardened steel races and sealed construction to protect against dust and moisture in warehouse environments. Direct replacement for bearing 62012RSL19, designed for reliable performance in Crown pallet jack and lift truck wheel assemblies.
Specifications
Bearing Type & Design
| Bearing Type | Single-row deep groove ball bearing |
| Seal Design | Double-sealed (2RS) |
Dimensions
| Outer Diameter | 1.255 inch |
| Inner Diameter | 0.472 inch |
| Width | 0.389 inch |
Material & Construction
| Race Material | Hardened steel, ground finish |
| Overall Material | High-carbon chromium steel |
Part Numbers
| Manufacturer Part Number | CR 065081-015 |
| Cross-Reference Part Numbers | Equivalent to 62012RSL19 |
Application
| Compatible Equipment | Crown Wave electric pallet jacks and lift trucks |
Frequently Asked Questions
Q: What are the dimensions and specifications of the CR 065081-015 bearing?
A: The CR 065081-015 is a double-sealed, single-row deep groove ball bearing with a 1.255 inch outer diameter, 0.472 inch inner diameter, and 0.389 inch width. It is constructed from hardened high-carbon chromium steel with ground finish races and sealed design for protected operation.
Q: Which Crown pallet jack models are compatible with the CR 065081-015?
A: The CR 065081-015 is designed for Crown electric lift trucks and fits pallet jacks made by Crown, model Wave. Verify your equipment model designation and serial range match the Wave series before ordering to ensure compatibility.
Q: What bearing part number is equivalent to the CR 065081-015?
A: The CR 065081-015 is equivalent to bearing 62012RSL19. No additional supersedes or replaces part numbers are available. If you are replacing a failed bearing, confirm the cross-reference number on your equipment to avoid ordering an incompatible unit.
Q: Why is the CR 065081-015 sealed instead of open design?
A: The double-sealed design protects the bearing races and ball elements from dust, moisture, and contamination in warehouse and production environments. The sealed configuration reduces maintenance frequency compared to open bearings and extends service life in typical material handling conditions. The trade-off is that sealed bearings cannot be repacked with grease once installed.
Q: How long does a CR 065081-015 bearing typically last in Crown Wave equipment?
A: Service life depends on load cycles, operational hours, and maintenance practices. A properly installed and maintained CR 065081-015 can provide 2000 to 5000 operating hours in normal warehouse duty. Replace the bearing if you detect grinding, clicking, or excessive play in the load wheel assembly, or if seal inspection shows grease leakage or rust formation.
Q: Is the CR 065081-015 suitable for cold storage or wet floor environments?
A: The CR 065081-015 features sealed design that provides basic protection in cold storage and damp warehouse floors. However, the standard nitrile seal material is not optimized for prolonged wet or freezing environments. For intensive cold storage use below 0 degrees Fahrenheit, inspect seals every 500 operating hours for condensation or ice formation. Consider upgrading to a polyurethane-sealed variant if your Wave model operates primarily in frozen environments.