Spring Cup

Frequently Asked Questions

Q: What is the spring cup EP 259A8703P1 and where is it installed?
A: The EP 259A8703P1 is a spring cup used in electric lift truck hydraulic valve assemblies and mechanical actuators. The cup sits above or below a compression spring to distribute load and prevent the spring from extruding into narrow cavities. It is a precision metal component that must be installed in the correct orientation.

Q: What are the material and dimensional specifications for the EP 259A8703P1?
A: The EP 259A8703P1 spring cup is made from hardened steel to withstand repeated compression cycles and hydraulic pressure. Verify the outer diameter, inner diameter, height, and bore size match your original equipment specifications before ordering. Incorrect dimensions will prevent proper assembly and cause component failure.

Q: Which electric lift truck models use the EP 259A8703P1 spring cup?
A: This spring cup is compatible with electric lift trucks from Crown, Toyota, Raymond, Yale, Hyster, Jungheinrich, and similar OEM manufacturers. Fitment depends on the specific truck model, assembly type, and year of manufacture. Verify your equipment serial number and assembly location to confirm compatibility.

Q: What are signs that the EP 259A8703P1 spring cup needs replacement?
A: Replace the spring cup if you observe scoring marks, pitting, or wear on the internal bearing surface, if the cup is bent or deformed, or if the spring is pressing into surrounding material. Wear typically occurs after 5 to 10 years depending on duty cycle and hydraulic fluid condition. Regular inspections prevent secondary damage to springs and valve assemblies.

Q: Does the EP 259A8703P1 have alternative part numbers or cross-references?
A: Cross-reference information is available for specific equipment models. Provide your truck model number, serial range, and assembly type and we can identify equivalent parts or confirm if superseding part numbers are available. We can also verify fitment compatibility with your equipment.