Product Description
Technora aramid fiber grip (Yale OEM Part: YL 620086100) for use in electric lift truck cable assemblies. Engineered 4-leg braid with reinforced securing eye and abrasion-resistant urethane-coated covering. Rated for cable strain relief and mechanical pulling applications where dielectric, noncorrosive, and high-strength performance is required.
Specifications
Material & Construction
| Core Material | Technora® aramid multifilament |
Part Numbers
| OEM Part Number | YL 620086100 |
| Manufacturer Part Number | 620086100 |
Frequently Asked Questions
Q: What is the purpose of Technora aramid fiber grip YL 620086100?
A: YL 620086100 is a Technora aramid fiber grip engineered for cable assemblies on Yale electric lift trucks. The 4-leg braid design provides cable strain relief and mechanical pulling strength. The abrasion-resistant urethane-coated covering protects the cable from wear, environmental exposure, and physical damage during normal warehouse operations. This part is rated for dielectric, noncorrosive, and high-strength applications.
Q: What material properties make Technora aramid fiber suitable for YL 620086100?
A: Technora aramid multifilament offers exceptional tensile strength, heat resistance, and cut resistance compared to standard nylon or polyester. The material maintains performance across a wide temperature range, making it ideal for both cold storage and heated warehouse environments. Technora fibers resist chemical degradation and UV exposure, extending cable assembly lifespan in harsh warehouse conditions.
Q: How does the 4-leg braid configuration benefit cable protection?
A: The 4-leg braid design on YL 620086100 distributes mechanical loads evenly across four woven strands, providing superior strain relief at cable connection points. This configuration reduces stress concentration and prevents cable fraying at the grip interface. The reinforced securing eye accommodates cable attachment hardware and resists pull-out failures under load.
Q: What is the rated working load and environmental tolerance for YL 620086100?
A: YL 620086100 cable grips are rated for high mechanical pulling applications on lift truck cable systems. The urethane-coated aramid braid withstands temperatures from -20 degrees C to +80 degrees C, making it suitable for cold storage and outdoor operations. The grip maintains its dielectric properties, protecting equipment from electrical hazards. Verify the specific load rating against your cable assembly specifications before installation.
Q: How should YL 620086100 be maintained to extend cable assembly life?
A: Inspect YL 620086100 regularly for cuts, abrasion, or separation of the urethane coating. If the coating is damaged or the braid is visibly worn, replace the grip to prevent cable exposure and potential failure. Keep the grip clean and free from chemical splashes or oil accumulation. Periodic visual inspection during routine equipment maintenance prevents unexpected cable assembly failures.
Q: Is YL 620086100 compatible with non-Yale lift trucks?
A: YL 620086100 is a Yale OEM part designed for Yale electric lift truck cable assemblies. While the Technora aramid grip design is industry-standard, cable diameter and attachment hardware may differ across manufacturers. Other brands including Toyota, Crown, Raymond, and Hyster use similar aramid grips with different part numbers. Verify cable diameter and securing eye dimensions match your equipment before ordering.