Product Description
RUBBER DRIVE TIRE
Frequently Asked Questions
Q: What equipment is the GW 10X4X6.5-R rubber drive tire designed for?
A: The GW 10X4X6.5-R is a rubber drive tire with 10 inch diameter, 4 inch width, and 6.5 inch hub bore. It is designed as a drive wheel for electric lift trucks and pallet jacks. The rubber compound provides traction and gripping power needed for propulsion. Verify your equipment requires a 6.5 inch hub before ordering. Do not install as a load wheel or on non-motorized applications.
Q: How does the GW 10X4X6.5-R rubber tire differ from a polyurethane press-on tire?
A: Rubber drive tires like the GW 10X4X6.5-R are bonded or molded onto a steel core and provide natural grip without the hardness of polyurethane. Rubber absorbs vibration better and is quieter. Polyurethane press-on tires are harder (typically 87A shore hardness), non-marking, and ideal for polished or finished floors. Choose rubber for outdoor, rough, or wet surfaces where gripping power and durability matter. Choose polyurethane for clean indoor floors where marking or damage to the floor must be avoided.
Q: Is the GW 10X4X6.5-R a press-on or bonded tire?
A: The GW 10X4X6.5-R is a rubber drive tire. Based on the specification, it is a molded or bonded tire, not a press-on. It is permanently affixed to the steel core and cannot be removed or replaced without special equipment. If you need a tire that can be pressed off and replaced, you need the press-on version, such as the GW 10X4X6.5-SF-P (polyurethane press-on). Confirm your application requirements before ordering.
Q: What should I inspect if the GW 10X4X6.5-R tire is slipping or losing traction?
A: Check the tire surface for glazing, hardening, or buildup of floor contaminants. Clean the tire with warm water and a stiff brush to remove dirt and grime. Spin the tire by hand to feel for flat spots or uneven wear. If the tire is flat-spotted or worn smooth, it must be replaced. Check the motor and drive system to confirm they are delivering power. If the tire is clean and smooth, loss of traction may indicate a faulty motor coupler or drive shaft rather than a tire issue.
Q: Can wet or oily floors affect the performance of the GW 10X4X6.5-R?
A: Yes. Rubber tires like the GW 10X4X6.5-R can slip on wet, oily, or ice-covered surfaces. Clean the floor when possible to restore traction. In consistently wet environments, polyurethane press-on tires with aggressive tread or specialized rubber compounds may perform better. Do not operate electric lift trucks on flooded or icy surfaces as traction cannot be guaranteed. If your application involves water or oil exposure, consult with the equipment manufacturer for recommended tire specifications.
Q: What is the typical service life of the GW 10X4X6.5-R rubber drive tire?
A: A bonded rubber drive tire like the GW 10X4X6.5-R typically lasts 3 to 5 years with normal indoor warehouse use. Heavy-use outdoor applications or rough surfaces may reduce service life to 18 to 24 months. Inspect the tire every 500 operating hours for wear, cracking, or separation from the core. Replace the tire if you see exposed steel core, deep gouges, or if the rubber is hard and no longer grips. Once a bonded tire is worn, it cannot be repaired and the entire wheel assembly must be replaced.