Product Description
The Polyurethane Load Wheel is designed specifically for electric pallet jacks, providing durability and efficiency in material handling applications. This load wheel is available in two durometer variants, ensuring optimal performance for various load requirements.
Includes double-sided shielded sealed bearings
Specifications: 3.250 inch diameter x 4.500 inch width (3.250" x 4.500" | 3.25 x 4.5 wheel | 3-1/4 x 4-1/2 | 82.55mm x 114.30mm) | Bearing ID: 25mm (0.984 inch bore | 25.000mm ID)
• Constructed from high-quality polyurethane for enhanced wear resistance
• Available in 95A and 97A durometer options for tailored performance
• Ideal for smooth operation on various surfaces
This load wheel is compatible with a range of electric pallet jacks, making it an essential component for efficient material handling.
Frequently Asked Questions
Q: What does DS mean on the GW 2365-A-DS part number?
A: DS stands for Double-Sided shielded sealed bearings. This means the GW 2365-A-DS wheel includes sealed bearing shields on both sides of the wheel bore to keep water, dust, and debris out of the bearing races. Standard GW 2365 wheels do not have this feature. The sealed bearings make GW 2365-A-DS suitable for wet environments, outdoor use, or high-humidity warehouses where bearing corrosion is a concern.
Q: Should I use GW 2365-A-DS wheels on an electric pallet jack used outdoors or in wet areas?
A: Yes, GW 2365-A-DS is recommended for electric jacks operated in wet, humid, or outdoor environments. The double-sided shielded sealed bearings prevent water ingress and reduce bearing corrosion, which extends wheel and bearing life significantly. If your jack is used in a dry warehouse only, standard GW 2365 wheels will work fine and cost less. For mixed use (some outdoor, some indoor), GW 2365-A-DS is the safer choice to avoid bearing failure.
Q: Are GW 2365-A-DS wheels compatible with my existing electric pallet jack?
A: GW 2365-A-DS wheels have the same 3.250 inch diameter, 4.500 inch width, and 25mm bearing bore as standard GW 2365 wheels, so they will fit electric jacks designed for those dimensions. Verify your jack parts list specifies GW 2365 or GW 2365-A-DS. The sealed bearings are pre-installed in the wheel hub, so you do not need any additional tools or procedures. Drop-in replacement: remove the old wheel and install GW 2365-A-DS using the existing axle and cotter pin.
Q: How do sealed bearings on GW 2365-A-DS compare to open bearings on standard wheels?
A: Sealed bearings resist water, dirt, and moisture better than open bearings, which require regular lubrication and are prone to corrosion in wet conditions. Sealed bearings are maintenance-free and do not need re-lubrication during the wheel lifespan (12 to 24 months). Open bearings need quarterly lubrication and will corrode quickly if water reaches the bearing races. Trade-off: sealed bearing wheels cost 15 to 25 percent more but require no maintenance and last longer in harsh conditions.
Q: Can I replace only two wheels with GW 2365-A-DS and leave the other two as standard GW 2365?
A: Not recommended. Mixing sealed and open bearing wheels creates handling inconsistencies. The sealed bearing wheels may have slightly different rolling resistance or wear rates, causing the jack to pull to one side or steer unpredictably. Best practice: replace all four wheels at the same time with the same type (all GW 2365-A-DS or all standard GW 2365). If budget is a concern, replace wheels in pairs on the front and rear axles together.
Q: How long do sealed bearing wheels like GW 2365-A-DS last in outdoor warehouse use?
A: GW 2365-A-DS wheels typically last 18 to 30 months in outdoor or humid warehouse environments, compared to 6 to 12 months for standard open-bearing wheels in the same conditions. The sealed bearings prevent corrosion and water damage, significantly extending bearing and wheel lifespan. Regular cleaning of the wheel exterior (to remove salt, sand, or grit) helps prevent premature wear. Replace the wheel if bearing seals crack or if you hear grinding or binding when rotating the wheel.