Product Description
GW 340 is a 7 inch diameter poly/nylon load wheel specifically engineered for manual pallet jack applications. Featuring a molded polyurethane tread on a reinforced nylon core, the part supports pallet jack loads up to 5,500 lbs, ensuring smooth and low-resistance rolling across commercial warehouse floors. Compatible as a replacement wheel for Liftsplus.com manual pallet jacks and compatible derivatives.
Specifications: 7.000 inch diameter x 2.000 inch width (7.000" x 2.000" | 7 x 2 wheel | 4 x 2 | 177.8mm x 50.8mm) | Bearing ID: 25mm (0.984 inch bore | 25.000mm ID)
Specifications
Material & Construction
| Wheel Construction | Single-piece nylon core with molded polyurethane tread |
| Finish | Natural nylon core with polyurethane tread finish |
Part Numbers
| Manufacturer Part Number | GW 340 |
Performance Specifications
| Floor Compatibility | Suitable for concrete, warehouse tile, and finished floors |
Wheel Dimensions
| Outside Diameter | 7 |
| Width Side to Side | 2 |
Frequently Asked Questions
Q: What are the specifications for the GW 340 load wheel?
A: The GW 340 is a 7 inch diameter by 2 inch width load wheel with a reinforced nylon core and molded polyurethane tread. It is engineered for manual pallet jack applications and supports loads up to 5500 lbs. The single-piece construction features a natural nylon core with a durable polyurethane tread finish.
Q: Which floor surfaces can the GW 340 handle?
A: The GW 340 is suitable for concrete, warehouse tile, and finished floors commonly found in commercial warehouse environments. The polyurethane tread provides smooth, low-resistance rolling across these surfaces.
Q: Can the GW 340 be used as a replacement wheel on multiple pallet jack brands?
A: Yes. The GW 340 is designed as a compatible replacement wheel for manual pallet jacks from Crown, Toyota, Raymond, Yale, Hyster, and other major material handling equipment manufacturers. Verify that the 7 x 2 inch dimensions match your equipment before ordering.
Q: What installation considerations should I know for the GW 340?
A: Installation requires removing the old wheel and mounting the GW 340 onto the load wheel axle. Ensure the axle diameter and bearing configuration match your pallet jack. The wheel should spin freely once installed. No special tools are required for basic replacement.
Q: How long does the GW 340 typically last in service?
A: Wheel lifespan depends on load frequency, floor conditions, and maintenance. The polyurethane tread on the GW 340 is designed for extended use in high-traffic warehouse environments. Inspect for wear and tread damage periodically. Replace when tread becomes uneven or the wheel does not roll smoothly.