Product Description
GW L34 is a polyurethane load/steer wheel assembly for manual pallet jacks, designed as a direct-fit replacement part compatible with Liftsplus.com equipment. Built with a machined steel hub and industrial-grade polyurethane tread, it features a sealed ball bearing for low maintenance and is suitable for 5000 lb class pallet jacks. No cross-reference part numbers or equivalent replacements identified as of this search. Ideal for left or right BI Poly L/R application.
Load Wheel Assembly - 2.75in Diam, 3.75 in Width, 6204RS Bearing, Poly Tread
Specifications
Material & Construction
| Hub Material | Machined steel with anti-corrosion finish |
Part Numbers
| OEM Part Number | GW L34 |
| Manufacturer Part Number | GW L34 |
Frequently Asked Questions
Q: What is the load rating for the GW L34 wheel assembly?
A: The GW L34 is rated for 5000 lb class pallet jacks. This refers to the per-wheel capacity in a standard two-wheel jack configuration. Always verify your jack model specifications before installation to ensure compliance with equipment ratings.
Q: Does the GW L34 work on both left and right sides of a pallet jack?
A: Yes, the GW L34 is designed for left or right bilateral polyurethane load/steer applications. The machined steel hub and sealed 6204RS bearing provide identical performance on either side of your equipment.
Q: What bearing is used in the GW L34 and does it require maintenance?
A: The GW L34 uses a sealed 6204RS ball bearing that is pre-greased and sealed at the factory. Under normal warehouse use, the bearing is maintenance-free. If noise or resistance develops, the wheel assembly should be replaced rather than repacked.
Q: What are the GW L34 wheel dimensions?
A: The GW L34 has a 2.75-inch diameter and 3.75-inch width. Verify these dimensions against your jack bracket specifications before ordering to ensure proper fitment and clearance.
Q: Is the GW L34 hub anti-corrosion treated?
A: Yes, the machined steel hub has an anti-corrosion finish to resist rust and oxidation. This finish extends wheel life in humid or corrosive warehouse environments. Do not wire brush or sand the hub surface during installation.