Product Description
This load wheel kit features durable 70d durometer polyurethane wheels, offering enhanced longevity and smoother operation compared to standard materials. Designed to facilitate the movement of heavy loads, it reduces effort and minimizes noise and vibrations in the workplace. The black wheels blend seamlessly with most equipment and do not mark floors, making them ideal for various industrial settings.
Compatibility: Fits pallet jacks made by Wesco, model 272941. SKU: GWK-272491-LW
Specifications
Material & Construction
| Wheel Material | 70D Durometer Polyurethane |
Part Numbers
| OEM Part Number | GWK-272491-LW |
Frequently Asked Questions
Q: Will GWK-272491-LW fit my Wesco model 272941 pallet jack?
A: Yes, GWK-272491-LW is engineered as a direct replacement for Wesco model 272941 load wheels. Verify your jack model on the manufacturer nameplate before installation. The kit includes two complete wheel assemblies with all necessary hardware.
Q: How much quieter are these 70D wheels compared to standard options?
A: 70D durometer polyurethane wheels produce significantly less noise than harder wheels and metal wheels. Noise reduction is approximately 30 to 50 percent in warehouse and indoor settings. The exact reduction depends on floor surface and load weight. For noise-sensitive areas like hospitals or retail, these wheels are ideal.
Q: Do these wheels require maintenance or lubrication?
A: No lubrication is required. Bearings are pre-greased and sealed. Maintenance consists of visual inspection every 500 operating hours and cleaning with a dry cloth to remove dust and debris. If wheels become hard or cracked, replacement is necessary.
Q: What surfaces are these wheels safe to use on?
A: GWK-272491-LW wheels are safe on polished concrete, tile, vinyl, linoleum, and sealed wood. They will not mark these surfaces. Avoid rough gravel or sharp debris that can puncture or gouge the polyurethane. They perform well on warehouse floors and carpeted display areas.
Q: How do I install these wheels on my jack?
A: Lift the jack with another jack or hoist. Remove fasteners from old wheels using a wrench. Slide out the old wheel assemblies. Insert new assemblies and tighten fasteners to manufacturer torque specification (typically 25 to 35 foot-pounds for load wheels). Test wheel rotation before lowering jack.
Q: Can I mix these 70D wheels with other wheel types on the same jack?
A: Yes, it is acceptable to have different wheel types on the same jack, but not recommended. Mixing wheel durometers can cause uneven rolling and operator strain. If one wheel is damaged, replace all wheels on that axle with matching materials for consistent performance.