Product Description
This complete wheel kit includes two Ultra-Poly (70D) load wheel assemblies and two poly steer wheel assemblies, all equipped with bearings, axles, and fasteners. The durable 70D polyurethane construction ensures excellent rollability, reduced noise, and minimal floor marking, making it suitable for various environments such as display floors, carpeting, and warehouses. This high-quality kit is designed for compatibility with numerous equipment models, providing an effective solution for replacing worn or damaged wheels.
Compatibility: Fits pallet jacks made by Dayton, model 2ZE58. SKU: GWK-2ZE58-CK
Specifications
Dimensional
| Load Wheel Durometer | 70D Shore D |
Material
| Steer Wheel Material Specification | Polyurethane tread, nylon core |
Part Numbers
| Manufacturer Part Number | GWK-2ZE58-CK |
| Compatible Models | Dayton manual pallet jack model 2ZE58 |
| Additional Compatible Models | Possibly interchangeable with kits for Dayton models 2ZE59, 2ZE63, 4YX96, and 4YX97 (reference by part type and wheel construction) |
Frequently Asked Questions
Q: What is included in the GWK-2ZE58-CK complete wheel kit?
A: The GWK-2ZE58-CK includes two Ultra-Poly 70D load wheel assemblies and two poly steer wheel assemblies, all equipped with bearings, axles, and fasteners. The kit is designed for Dayton manual pallet jack model 2ZE58.
Q: Is GWK-2ZE58-CK compatible with Dayton models 2ZE59, 2ZE63, 4YX96, or 4YX97?
A: Possibly. The kit may be interchangeable with models 2ZE59, 2ZE63, 4YX96, and 4YX97 based on wheel construction and part type matching. However, axle sizes and mounting dimensions vary between models. Verify your exact model number and compare axle diameters before ordering. When in doubt, contact the manufacturer with your serial number to confirm compatibility.
Q: Why are the 70D load wheels better for warehouses and display floors than standard options?
A: 70D polyurethane is hard and non-marking, preventing black streaks on sealed concrete, tile, and polished display floors. It resists flat-spotting under static loads and does not shatter in cold storage facilities. The reduced noise from harder material is also beneficial in retail environments where squeaking wheels distract customers.
Q: How do I install the GWK-2ZE58-CK wheels on my Dayton 2ZE58 pallet jack?
A: Lift the pallet jack completely off the floor using a floor jack. Remove the fasteners securing each wheel axle using the appropriate wrench or socket. Carefully slide the old wheel assemblies off the axles. Align the new wheel assembly onto the axle, ensuring the bearing is fully seated. Reinstall fasteners and torque them evenly to the manufacturer spec (typically 25-40 foot-pounds). Lower the jack and test steering and rolling before loading.
Q: What maintenance prolongs the life of wheels in the GWK-2ZE58-CK kit?
A: Inspect wheels monthly for debris, cracks, and wear. Clean polyurethane surfaces with a damp cloth to maintain rolling efficiency. Check fasteners quarterly and retighten if loose. Do not drag the jack sideways on the wheels when turning sharply. Store the pallet jack indoors during winter to slow polyurethane degradation. Replace wheels immediately if you hear grinding, feel excessive resistance, or observe visible damage.
Q: How long does the GWK-2ZE58-CK wheel kit last before replacement is needed?
A: Expected lifespan is 3-6 years in typical warehouse use with daily operation. Cold storage use may extend life to 7-8 years because polyurethane remains more elastic at low temperatures. Outdoor or rough concrete use shortens lifespan to 2-3 years. Replace wheels when tread depth reduces by 50 percent, cracks appear, or flat spots interfere with rolling motion.