Product Description
This Poly Load Wheel Kit enhances the performance of pallet jacks with its durable and high-quality construction. Featuring superior 97A durometer wheels, it rolls effortlessly on various surfaces, making it suitable for display floors, carpeting, and warehouses while minimizing floor marks. The polyurethane material provides resilience against heavy loads, rust, and corrosion, ensuring long-lasting use even in tough environments.
Compatibility: Fits pallet jacks made by Toyota, model 7BWS10. SKU: GWK-7BWS10-LW-XL
Specifications
Material & Construction
| Wheel Material | Polyurethane (97A hardness, non-marking) |
| Wheel Core Material | Machined carbon steel |
Mechanical Specifications
| Durometer Rating | 97A (Shore A) |
| Noise Level | Low noise rolling profile (≤75 dBA under loaded conditions) |
Part Numbers
| OEM Part Number | GWK-7BWS10-LW-XL |
| Compatible Models | Toyota Walkie Stacker models 7BWS10, 7BWS13 |
Frequently Asked Questions
Q: What models does the GWK-7BWS10-LW-XL fit, and is it compatible with 7BWS13?
A: The GWK-7BWS10-LW-XL is compatible with Toyota walkie stacker models 7BWS10 and 7BWS13. Do not use on 7BWS10 standard or older 7HBC models, as the XL wheel assembly has a different axle bore diameter. Cross-referencing the serial plate on your jack will confirm the correct model.
Q: Why are 97A durometer wheels better than 95A for demanding environments?
A: The 97A durometer is 2 points harder than the 95A standard, providing greater load capacity, reduced deformation under heavy stress, and extended service life. The machined carbon steel core on the XL variant absorbs impact better and resists bending. Use 97A wheels in high-volume distribution centers or environments with frequent heavy-load cycles exceeding 50 lifts per shift.
Q: Does this wheel kit produce low noise on carpeted and tiled warehouse floors?
A: Yes. The low-noise rolling profile operates at approximately 75 dBA under loaded conditions on both carpet and tile. The polyurethane formulation dampens vibration and rolling resistance, making it quieter than cast iron or standard rubber wheels while maintaining traction on varied floor types.
Q: Is the GWK-7BWS10-LW-XL safe for use on display floors, and will it cause marks?
A: Yes, this kit is non-marking and safe for display and retail flooring. The polyurethane tread will not stain, scuff, or leave residue on polished concrete, sealed wood, or tile. This makes it ideal for retail showrooms, food distribution, and pharmaceutical warehouses where floor protection is critical.
Q: Can the GWK-7BWS10-LW-XL be used in freezer or cold storage facilities?
A: Standard 97A polyurethane is not recommended below 20 degrees Fahrenheit, as the compound becomes brittle and loses flexibility. For cold storage use below 32 degrees, contact the supplier for nylon or reinforced elastomer alternatives designed for sub-zero environments. Nylon wheels offer better low-temperature performance but different rolling characteristics.
Q: What is the maintenance schedule and expected lifespan for this kit?
A: Inspect bearing seals and axle fasteners every 500 operating hours or monthly, whichever is first. Under normal warehouse duty, expect 18 to 30 months of service life. Replace immediately if wheels develop flat spots, visible cracking, or if the jack becomes difficult to push. The machined steel core resists corrosion, so this kit lasts longer than standard models in humid environments.