Product Description
GWK-AC25-LW Load Wheel Kit designed for Doosan AC25 manual pallet jacks. Kit includes two Ultra-Poly 70D load wheels pre-assembled with sealed precision bearings, carbon steel axle, and hardened fasteners. Engineered with a Shore D 70 hardness polyurethane tread for high load capacity and low rolling resistance. Direct replacement for the original Doosan AC25 load wheel assembly.
Compatibility: Fits pallet jacks made by Doosan, model AC25. SKU: GWK-AC25-LW
Specifications
Material & Construction
| Wheel Construction | Ultra-Polyurethane tread bonded to polymer core |
| Axle Material | High-strength carbon steel |
Part Numbers
| OEM Part Number | GWK-AC25-LW |
| Manufacturer Part Number | GWK-AC25-LW |
| Compatible Models | Doosan model AC25 manual pallet jack |
Frequently Asked Questions
Q: Is GWK-AC25-LW equivalent to Doosan or Clark original equipment load wheels?
A: Yes. GWK-AC25-LW is manufactured as a direct replacement for the original Doosan AC25 load wheel assembly. It matches the OEM dimensions, material specification (Shore D 70 Ultra-Poly), axle diameter, bearing type, and fastener pattern. It is a like-for-like substitute for the OEM part and carries no fitment risk.
Q: The product says sealed precision bearings. What does that mean for maintenance?
A: Sealed bearings are pre-lubricated factory assemblies with seals that prevent dirt, water, and debris from entering the bearing races. You cannot add grease or oil to these bearings. They are maintenance-free for their service life. If a bearing begins to squeak, drag, or make grinding noise, the entire wheel assembly must be replaced. Do not attempt to open or repack the seals.
Q: What is the low rolling resistance benefit of GWK-AC25-LW?
A: Shore D 70 polyurethane has been engineered to minimize resistance as the wheel rolls, reducing the force required to push or maneuver the jack. Lower rolling resistance translates to reduced operator fatigue during long work shifts and faster material movement. This is especially important in high-volume distribution centers. Damage to the wheel tread increases rolling resistance and negates this benefit.
Q: Can I replace just one load wheel or must I replace both?
A: For even load distribution and predictable handling, always replace both load wheels as a pair. Mixing a new wheel with a worn wheel creates height difference, uneven weight transfer, and steering drift. Over time this accelerates wear on the newer wheel and stresses bearings. Replace both wheels in the same service interval.
Q: How do I diagnose if my AC25 has a load wheel problem versus a steer wheel problem?
A: Load wheel problems cause the jack to roll sluggishly or require extra force to move forward and backward. You may hear a grinding sound or feel vibration. Steer wheel problems cause the jack to veer left or right even when steering straight, or to not turn smoothly. Load wheel repairs use GWK-AC25-LW. Steer wheel repairs require a separate steer wheel kit. Isolate which wheels are worn by manually spinning each wheel while raised on jack stands.
