Product Description
GWK-RSS40-LW is a Raymond OEM polyurethane load wheel kit, shore hardness 95A, sized 4 inches in diameter x 1-7/8 inches in width, intended for use on Raymond RSS40 series electric walk-behind/ride-on straddle stackers. No cross-reference part numbers are identified. Installation details, load capacity, and compatibility are equipment-dependent. For full application, consult Raymond equipment documentation. These are designed for the "Wal-mart" units
Compatibility: Fits pallet jacks made by Raymond, model RSS40. SKU: GWK-RSS40-LW
Specifications
Material
| Wheel Material | 95A durometer polyurethane |
Part Numbers
| Manufacturer Part Number | GWK-RSS40-LW |
| Compatible Equipment | Raymond RSS40 electric walkie stacker |
Frequently Asked Questions
Q: Is GWK-RSS40-LW for walk-behind or ride-on Raymond straddle stackers?
A: Compatible with both walk-behind and ride-on Raymond RSS40 series models featuring 42-inch forks and straddle leg design. Installation and wheel positioning may differ between configurations. Verify your stacker type and fork width before ordering. Consult Raymond documentation for load-wheel part number confirmation.
Q: What does 95A durometer hardness mean for a 4-inch straddle stacker wheel?
A: 95A Shore hardness provides medium-hard polyurethane for straddle stackers that operate in aisles, cross-cutting concrete, and around pallet racking. This hardness balances load support with reduced drag compared to harder compounds. Straddle stackers require slightly softer wheels than pallet jacks due to the wider stance; do not substitute with 98A or harder.
Q: Are there equivalent part numbers from other manufacturers for GWK-RSS40-LW?
A: No cross-reference part numbers are identified. This is an OEM Raymond kit sourced specifically for RSS40 series straddle stackers. Aftermarket wheel kits may vary in bore diameter, axle length, or brake integration. Always order by OEM part number to ensure fit and safety.
Q: What is the load capacity of GWK-RSS40-LW wheels?
A: Load capacity and mechanical specifications are not published in available sources. Consult your Raymond RSS40 nameplate and equipment manual for maximum wheel load rating. Exceeding rated capacity will flatten the wheels and accelerate bearing failure, creating steering hazards.
Q: How do I diagnose if GWK-RSS40-LW wheels are worn and need replacement?
A: Inspect monthly for visible flat-spotting, cracking, or permanent deformation. Listen for grinding or squealing during forward and reverse movement. Check for lateral play by grasping the wheel and pushing side to side; movement indicates bearing wear. Test steering response; sluggish or uneven steering suggests wheel wear. If any symptoms are present, replace the wheel kit to restore straddle stability.
Q: Do GWK-RSS40-LW wheels require different installation on walk-behind versus ride-on stackers?
A: Wheel installation procedure is the same for both configurations. The difference is in bearing preload specifications and brake integration, which vary by RSS40 model. Consult your specific equipment manual for torque specifications and bearing adjustment. Improper bearing preload causes early failure or wheel lock-up; follow manufacturer guidance precisely.